Page 81 / 156
Scroll up to view Page 76 - 80
WDS Settings
WLAN
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
7-15
Edition 01
May 2008
Figure 7-7
WDS Settings window
The following table describes the fields of the WDS Settings window.
Table 7-7
Field descriptions
Field
Description
Enable WDS
Select the check box to enable the WDS
function and set the WDS parameters.
MAC Addr
The MAC address of the access point.
Comment
A comment to describe the access point.
Apply Changes
Click to add the access point MAC address
and comment to the Current WDS AP List.
Reset
Click to clear the
MAC Addr
and
Comment
fields.
Current WDS AP List
A listing of the access points added to the
WDS.
Page 82 / 156
WLAN
WDS Settings
7-16
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Field
Description
Delete
Select a row in the Current WDS AP List
table and click to delete the row.
Delete All
Click to delete all rows in the Current WDS
AP List table.
Page 83 / 156
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
8-1
Edition 01
May 2008
8
WAN
Overview
Purpose
Click
WAN
in the CellPipe 7130 RG menu bar to open the WAN menu, which contains
WAN Interface
and
ADSL Settings
. This menu is available only for the admin user.
Contents
This chapter covers the following topics:
WAN Interface
8-1
ADSL Settings
8-10
WAN Interface
Click
WAN Interface
in the WAN menu to open the Channel Configuration window. In
this window you can configure the parameters for the channel operation modes of the
CellPipe 7130 RG.
Page 84 / 156
WAN
WAN Interface
8-2
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Figure 8-1
Channel Configuration window
The following table describes the fields of the Channel Configuration window.
Table 8-1
Field descriptions
Field
Description
Current ATM VC Table
This table lists the PVCs that have
already been created. It shows the
Interface name, Channel Mode, VPI/VCI,
Encapsulation mode, NAPT status, local
IP address, remote IP address, user name,
default route, and status. The maximum
number of entries in this table is eight.
Page 85 / 156
WAN Interface
WAN
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
8-3
Edition 01
May 2008
Field
Description
Click this button; the PPP Interface -
Modify window appears. In this window
you can modify the PVC parameters;
however, the default settings are
recommended.
VPI
The identifier for a virtual path between
two points in an ATM network; a value
between 0 and 255.
VCI
The identifier for a virtual channel
between two points in an ATM network;
a value between 32 and 65535 (1 to 31
are reserved for known protocols).
Encapsulation
Choose between LLC and VC-Mux.
Channel Mode
Choose among:
•
1483 Bridged
•
1483 MER
•
PPPoE
•
PPPoA
•
1483 Routed
Application Mode
Choose Internet.
Admin Status
Enable or disable the PVC. When
disabled, this PVC is unusable.
Enable NAPT
Select the check box to enable the NAPT
functions of the CellPipe 7130 RG.
NAPT must be enabled if the CellPipe
7130 RG is functioning as a router.
Login Name
The user name provided by your ISP.
Password
The password provided by your ISP.
19216811.live