1. Home
    2. /
  2. Manuals
    3. /
  3. Alcatel-Lucent
    4. /
  4. CellPipe 7130 RG
    5. /
  5. 18
Page 86 / 156 Scroll up to view Page 81 - 85
WAN
WAN Interface
8-4
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Field
Description
Connection Type
Choose among:
•
Continuous
(the connection is
established automatically, regardless
of the amount of traffic)
•
Connect on Demand
(the
connection is only opened when
traffic must pass through an
interface)
•
Manual
(used to connect to a
location once or occasionally – a user
must log in to the CellPipe 7130 RG
and force the connection open).
Idle Time(min)
If you selected
Connect on Demand
as
the Connection Type, you must specify
the idle time. If the CellPipe 7130 RG
detects no traffic from the user for the
amount of time specified, the CellPipe
7130 RG will automatically disconnect
the PPPoE connection.
Type
Choose between:
•
Fixed IP
- enter the Local IP
address, remote IP address, and
subnet mask.
•
Use DHCP
- the CellPipe 7130 RG
functions as a DHCP proxy; the
WAN IP address is assigned by the
remote DHCP server.
Local IP Address
The IP of WAN interface provided by
your ISP.
Remote IP Address
The gateway IP provided by your ISP.
Subnet Mask
The subnet mask of the Local IP Address.
Page 87 / 156
WAN Interface
WAN
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
8-5
Edition 01
May 2008
Field
Description
Unnumbered
Select the check box to enable the
unnumbered IP function. Using an
unnumbered IP interface allows you to
borrow an IP address already configured
on one of the other interfaces of the
CellPipe 7130 RG.
Default Route
Enable
the default route function when
you are configuring PPPoA, PPPoE,
1483 Routed and 1483 MER connections.
Add
Click to add the new PVC to the Current
ATM VC Table.
Modify
Select a PVC in the Current ATM VC
Table and modify the settings of this
PVC. Click
Modify
to save your
changes.
Delete
Select a PVC in the Current ATM VC
Table and click to delete this PVC.
Undo
Click to clear the parameter fields.
ATM Setting
Click to configure the QoS mode of the
ATM PVC; see Figure 8-3. The default
settings are recommended.
If the PVC uses PPP as the channel mode, click
in the Current ATM VC Table; the
PPP Interface – Modify window appears. In this window you can configure the
parameters of the selected PPPoE PVC.
Page 88 / 156
WAN
WAN Interface
8-6
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Figure 8-2
PPP Interface ° Modify window (4-port wireless model shown)
The following table describes the fields of the PPP Interface - Modify window.
Table 8-2
Field descriptions
Field
Description
PPP Interface
The preset identifier of the PPP Interface
Protocol
The protocol type used for this WAN
connection.
ATM VCC
The ATM virtual circuit connection
assigned for this PPP interface (VPI/VCI)
Status
The status of the PVC you are
configuring.
Page 89 / 156
WAN Interface
WAN
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
8-7
Edition 01
May 2008
Field
Description
Login Name
The login name provided by your ISP.
Password
The password provided by your ISP.
Authentication Method
Choose among:
•
PAP
•
CHAP
•
Auto
Connection Type
Choose among:
•
Continuous
•
Connect on Demand
•
Manual
Idle Time
If the CellPipe 7130 RG detects no traffic
from the user for the amount of time
specified, the CellPipe 7130 RG will
automatically disconnect the PPPoE
connection.
Auto Disconnect Time
9
If set, the CellPipe 7130 RG disconnects
automatically, even if data is being
transmitted.
Warn Disconnect Delay
9
If the Auto Disconnect Time is set, you
can configure a warning period that will
follow the disconnect time, after which
the CellPipe 7130 RG disconnects.
Default Route
Enable
the default route function when
you are configuring PPPoA, PPPoE,
1483 Routed and 1483 MER connections.
MTU/MRU
The size of the largest packet or frame
that can be transmitted.
9
4-port wireless model only.
Page 90 / 156
WAN
WAN Interface
8-8
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Field
Description
IP Address
Choose a dynamic or static IP address for
the WAN interface, as prescribed by your
ISP.
Bridge
Choose among:
•
Bridged Ethernet
•
Bridged PPPoE
•
Disable Bridge
AC-Name
The accessed equipment type.
Service-Name
9
The service name.
802.1q
9
Specifies whether VLAN tagging should
be used.
VLAN ID
9
The unique number assigned to this
virtual LAN.
Apply Changes
Click to save your changes.
Return
Click to return to the Channel
Configuration window.
Undo
Click to clear the values of the fields in
this window
Click
ATM Setting
in the Channel Configuration window; the ATM Setting window
appears. In this window you can configure the ATM parameters for the CellPipe 7130
RG, including the QoS type, PCR, CDVT, SCR, and MBS.

Rate

4.8 / 5 based on 4 votes.

Popular Alcatel-Lucent Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top