Page 21 / 156
Scroll up to view Page 16 - 20
To install the CellPipe 7130 RG
Hardware installation
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
2-3
Edition 01
May 2008
Figure 2-1
CellPipe 7130 RG, splitter, and telephone connections (4-port
Ethernet model shown)
2
Connect the Ethernet port of the CellPipe 7130 RG to the network card of the PC using a
twisted pair category 5 Ethernet cable (MDI/MDIX).
3
Plug the power adapter into the wall outlet and connect the other end to the Power port of
the CellPipe 7130 RG.
E
N D
O
F
S
T E P S
Page 23 / 156
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
3-1
Edition 01
May 2008
3
Accessing the CellPipe 7130
RG configuration tool
Overview
Purpose
The following detailed procedure is intended for first time users to assist with CellPipe
7130 RG configuration.
Contents
This chapter covers the following topics:
To access the CellPipe 7130 RG configuration tool
3-1
To access the CellPipe 7130 RG configuration tool
When to use
Use this procedure to access the Web configuration interface of the CellPipe 7130 RG.
The configuration interface enables you to secure the CellPipe 7130 RG, limit access, set
traffic routes, modify passwords, and change advanced settings.
Page 24 / 156
Accessing the CellPipe 7130 RG configuration tool
To access the CellPipe 7130 RG configuration tool
3-2
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Before you begin
Before you can configure the CellPipe 7130 RG, it must be installed, connected to a
Web-enabled PC, and turned on.
Procedure
1
Open a Web browser and enter the IP address of the CellPipe 7130 RG in the Address
bar:
↵
2
Enter your username and password. There are two default accounts:
admin
and
user
.
The admin account has permission to configure the CellPipe 7130 RG settings and run
system diagnostics. The user account can view the CellPipe 7130 RG status, but cannot
alter the CellPipe 7130 RG settings. The admin password is
admin
. The user password is
user
.
Figure 3-1
Login screen
The System Status window appears. If you logged in as admin you can see CellPipe 7130
RG menus for Status, Wizard, LAN, WLAN
3
, WAN, Advance, and Admin. If you logged
in as user you can only see menus for Status and Admin. This window includes common
router, bridge, and PPPoE settings. The System Status window is described in chapter 4.
3
Wireless model only.
Page 25 / 156
To access the CellPipe 7130 RG configuration tool
Accessing the CellPipe 7130 RG configuration tool
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
3-3
Edition 01
May 2008
Figure 3-2
System Status window (4-port wireless model shown)
Once you have logged in for the first time, you should change the login password. See
“Password” in Chapter 10 for more information.
E
N D
O
F
S
T E P S
19216811.live