Page 36 / 89
Scroll up to view Page 31 - 35
32
VDSL2/GigE Wireless 11n Gateway
3.
Select the application from the Applications drop-down list.
4.
If desired, view the rule by clicking the View Rule button. A new screen
appears, listing the application’s port forwarding details. Click
Back
to return
to the Applications screen.
5.
Click
Apply
to save your changes.
6.
Repeat steps 1-5 to configure additional applications.
The list of forwarded applications will be displayed in the Forwarded Applications
List at the bottom of the screen.
DMZ Hosting
Click
DMZ Hosting
from any Firewall screen to generate the DMZ Hosting screen.
The DMZ (De-Militarized Zone) host feature allows one device on the network to
operate outside the firewall to use an Internet service that otherwise would be blocked,
or to expose a networked device to all services without restriction or security.
Caution!
A DMZ host is not protected by the firewall and may be
vulnerable to attack. Designating a DMZ host may also put other
computers in the local network at risk. When designating a DMZ
host, consider the security implications and protect it if necessary.
Page 37 / 89
33
Chapter 4
Firewall
To designate a local computer as a DMZ host:
1.
Click in the Enable radio button to activate DMZ hosting.
2.
Select a networked device by selecting it from Select Device drop-down list, or
enter its IP address in the “Enter IP Address” text box.
3.
Click
Apply
to save your changes.
The DMZ host will be displayed in the DMZ Hosted Device table at the bottom of
the screen. Only one device at a time on the Gateway’s network can be designated
as a DMZ host.
IPv6 DMZ Hosting
Click
IPv6 DMZ Hosting
from any Firewall screen to generate the IPv6 DMZ
Hosting screen. The DMZ (De-Militarized Zone) host feature allows one device on
the network to operate outside the firewall to use an Internet service that otherwise
would be blocked, or to expose a networked device to all services without restriction
or security.
To set up IPv6 DMZ hosting:
1.
Enter the last 64 bits of the IPv6 address in the appropriate text box.
2.
Click
Apply
.
Page 38 / 89
34
VDSL2/GigE Wireless 11n Gateway
The DMZ host will be displayed in the IPv6 DMZ Hosted Device table at the bot-
tom of the screen. Only one device at a time on the Gateway’s network can be des-
ignated as a DMZ host.
UPnP
Click
UPnP
from any Firewall screen to generate the UPnP screen. UPnP (Universal
Plug and Play) allows all supported devices on the Gateway’s network to discover and
interface with each other without additional configuration. To enable UPnP on the
Gateway’s network, click in the Enable radio button, then click
Apply
.
Page 39 / 89
35
Configuring
Advanced Setup
This chapter will explain the options provided in the Advanced Setup section of
the Gateway’s firmware, including services blocking, restoring the Gateway to fac-
tory default settings, and performing a ping test.
Important!
These settings should be configured by an experienced network tech-
nician only. Improper configuration can result in the Gateway operating poorly or
not at all.
Accessing Advanced Setup
To access the Advanced Setup screens:
1.
Open a Web browser. In the Address text box, type:
then press
Enter
on the keyboard.
5
Page 40 / 89
36
VDSL2/GigE Wireless 11n Gateway
2.
The Gateway’s Home screen appears. Enter your user name and password, then
click Advanced Setup from the row of icons at the top of the screen.
3.
A Warning screen appears, informing the user that the settings in the
Advanced Setup are for experienced network professionals only. Click
Yes
. The
Advanced Setup screen appears, with various options listed in the menu on the
left side of the screen.
19216811.live