Page 26 / 89
Scroll up to view Page 21 - 25
22
VDSL2/GigE Wireless 11n Gateway
To set up WPS:
1.
Enable WPS by clicking in the Enable radio button.
2.
Click
Apply
to save your changes.
3.
If connecting a device to the wireless network with a WPS AP PIN, write down
the PIN displayed after Current WPS AP Pin, then enter the PIN in the device’s
WPS AP PIN configuration.
4.
If connecting a device to the wireless network with PBC (Push Button
Configuration), click
Connect
, then press the PBC-compatible button on
the device within two minutes.
5.
If the connecting device uses the End Device PIN method, enter the PIN in the
appropriate text box, then enter in the device’s End Device PIN configuration.
Page 27 / 89
23
Chapter 3
Wireless Settings
Wireless MAC Authentication
Click
MAC address control
in any Wireless screen to generate the Wireless MAC
Authentication screen. MAC addresses are alphanumeric designations provided to
every networkable device that act as unique identifiers. Using MAC addresses, you
can allow or deny access to the Gateway’s wireless network to the wireless devices of
your choice.
To set up wireless MAC authentication:
1.
Select the SSID from the SSID drop-down menu.
2.
Turn on the MAC authentication by clicking in the Enable radio button next to
MAC Authentication.
3.
To allow or delete certain devices from the Gateway’s wireless network, click in
the appropriate radio button (Allow device list or Deny device list).
4.
Enter the device’s MAC address by either selecting it from the Select MAC
Page 28 / 89
24
VDSL2/GigE Wireless 11n Gateway
Address drop-down list, or manually entering it in the Manually Add MAC
Address text box.
5.
Click
Apply
to save your changes.
6.
Repeat steps 1-5 to add more devices.
Wireless Distribution System
Click
WDS
in any Wireless screen to generate the WDS Wireless Distribution
System screen. This screen allows the user to set up a network of access points via
a wireless connection.
To set up WDS:
1.
Turn on WDS by clicking in the Enable radio button next to WDS Main Base
Station.
2.
Select an access point (remote base station) from the drop-down menu next to
Select Device, or enter the device’s MAC address in the Manually Add MAC
Address text box.
3.
Select the type of base station being configured (client station or repeater).
Page 29 / 89
25
Chapter 3
Wireless Settings
4.
Click
Apply
to save your changes.
5.
Repeat steps 2-4 for additional base stations.
The list of configured base stations will appear at the bottom of the screen, under
WDS Remote Station List.
Page 30 / 89
26
Configuring
Firewall Settings
This chapter will explain the options provided in the Firewall section of the
Gateway’s firmware, including various firewall options, port forwarding, and
DMZ hosting.
Accessing Firewall Settings
To access the Firewall screens:
1.
Open a Web browser. In the Address text box, type:
then press
Enter
on the keyboard.
4
19216811.live