Page 61 / 89
Scroll up to view Page 56 - 60
57
Chapter 5
Advanced Setup
IPv6 Ping Test
Selecting
IPv6
Ping Test
from any Advanced Setup screen generates the IPv6 Ping
Test screen, which is used to check whether the Gateway is properly connected to
the Internet via IPv6. Follow the on-screen instructions to perform the test. The
results will be displayed at the bottom of the screen.
Page 62 / 89
58
VDSL2/GigE Wireless 11n Gateway
Traceroute
Selecting
Traceroute
from any Advanced Setup screen generates the Traceroute
screen, which is used to determine the route taken by packets across a network.
Follow the on-screen instructions to perform the test. The results will be displayed
at the bottom of the screen.
Page 63 / 89
59
Chapter 5
Advanced Setup
IPv6 Traceroute
Selecting
IPv6 Traceroute
from any Advanced Setup screen generates the IPv6
Traceroute screen, which is used to determine the route taken by packets across a
network via IPv6. Follow the on-screen instructions to perform the test. The results
will be displayed at the bottom of the screen.
Time Zone
To set the correct time zone on the Gateway:
1.
Click
Time Zone
from the left side of any Advanced Setup screen. The Time
Zone screen appears.
Page 64 / 89
60
VDSL2/GigE Wireless 11n Gateway
2.
Click in the appropriate radio button for your time zone.
3.
If daylight saving is currently in effect, click in the Day Light Saving check box
to activate
4.
Click
Apply
to save your settings.
Language Settings
Selecting
Language
from any Advanced Setup screen generates the Language
screen, which is used to change the language of the Gateway’s GUI. Select a lan-
guage from the drop-down menu, then click
Apply
.
Page 65 / 89
61
Chapter 5
Advanced Setup
HPNA Diagnostics
Selecting
HPNA Diagnostics
from any Advanced Setup screen generates the
HPNA Diagnostics screen, which is used to test the Gateway’s HPNA (Home
Phoneline Networking Alliance) connections. Follow the on-screen instructions to
perform the test. It is intended for use by experienced technicians only. The results
will be displayed at the bottom of the screen.