1. Home
    2. /
  2. Manuals
    3. /
  3. Actiontec
    4. /
  4. T1200H
    5. /
  5. 12
Page 56 / 89 Scroll up to view Page 51 - 55
52
VDSL2/GigE Wireless 11n Gateway
Restoring Factory Default Settings
If the Gateway’s factory default settings need to be restored (to build a new net-
work from the beginning, for example), use the following procedure:
1.
Click
Restore
Defaults
in any Advanced Setup screen. The Restore Defaults
screen appears.
2.
If you want to restore only the Gateway’s default WAN port settings, click
Restore
across from Restore WAN port Settings. The Gateway’s current
WAN port settings will be deleted, and the factory default WAN port settings
restored.
3.
If you want to restore only the Gateway’s default wireless settings, click
Restore
across from Restore Default Wireless Settings. The Gateway’s current wireless
settings will be deleted, and the factory default wireless settings restored.
4.
If you want to restore only the Gateway’s default firewall settings, click
Restore
across from Restore Default Firewall Settings. The Gateway’s current firewall
settings will be deleted, and the factory default firewall settings restored.
5.
If you want to restore all the Gateway’s default settings, click
Restore
across
from Restore Modem to Factory Default Settings. All of the Gateway’s current
settings (including wireless and firwall settings) will be deleted, and the factory
default settings restored.
Note:
All of the Gateway’s settings and parameters will be
restored to their default values after performing the Restore
Factory Default procedure.
Page 57 / 89
53
Chapter 5
Advanced Setup
Speed Test
Selecting
Speed Test
from any Advanced Settings screen generates the Speed Test
screen. Enter a website URL in the appropriate text box, then click
Test
. The con-
nection’s speed results will be displayed.
Page 58 / 89
54
VDSL2/GigE Wireless 11n Gateway
Ping Test
Selecting
Ping Test
from any Advanced Setup screen generates the Ping Test
screen, which is used to check whether the Gateway is properly connected to the
Internet. Follow the on-screen instructions to perform the test. The results will be
displayed at the bottom of the screen.
Page 59 / 89
55
Chapter 5
Advanced Setup
TCP Dump Debug
Selecting
TCP Dump Debug
from any Advanced Setup screen generates the TCP
Dump Debug screen, which is used to debug the Gateway’s TCP (transmission
control protocol) dump. Follow the on-screen instructions to perform the test. This
test is intended for use by experienced technicians only. The results will be dis-
played at the bottom of the screen.
Page 60 / 89
56
VDSL2/GigE Wireless 11n Gateway
Iperf Test
Selecting
Iperf Test
from any Advanced Setup screen generates the Iperf Test
screen, which is used to check the throughput of the Gateway’s network using TCP
and UDP streams. It is intended for use by experienced technicians only. Follow
the on-screen instructions to perform the test. The results will be displayed at the
bottom of the screen.

Rate

4.5 / 5 based on 2 votes.

Popular Actiontec Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top