2Wire 2701HG Router Manual PDF (Setup & Configuration Guide)

Page 36 / 132 Scroll up to view Page 31 - 35

Home Network Tab

31

Setting Up a Bridge Network

The Bridge Network pane allows you to create a local network that has broadband-accessible IP addresses.

Bridge Network is a public network in which the local network is an extension of the broadband network and

does not require any special routing. Computers that are assigned Bridge Network IP addresses operate

without Network Address Translation (NAT). This feature is typically used in conjunction with broadband

service that provides a range of IP addresses. Once enabled, the bridge network IP addresses can be

assigned to local computers.

To set up a bridge network:

1.

Check the

Enable

checkbox.

2.

In the Subnet Mask field, enter the subnet mask (this is typically provided by your service provider, and

defines how large your IP pool is).

3.

Click

SAVE

.

Showing a Device as Inactive

To show a device as Inactive:

1.

Open a Web browser and access the 2Wire gateway user interface.

2.

Click the

Home Network

tab.

3.

Click the Advanced Settings

link under the tab.

4.

In the Settings pane, select the

Show inactive devices in network list

checkbox.

5.

Click

SAVE

.

Page 37 / 132

32

VoIP Network Tab

This chapter describes the 2Wire gateway VoIP Network features, and provides detailed instructions on

setting up a VoIP network.

Configuring the VoIP Phones

To configure VoIP via the gateway user interface, follow these steps.

1.

Access the gateway user interface by opening a web browser and entering http://

2wire.gateway.net

.

Click the Voice Network tab. The View Voice Network page opens.

2.

Click Step 2: Set Up Phone Lines. Click

EDIT

to change the settings.

Page 38 / 132

VoIP Network Tab

33

3.

The account is based on username or phone number. To change this setting, from the pull-down menu

select Username or Phone Number. To ensure that the settings cannot be changed, in the Password

field enter a password. From the Ring Tone pull-down menu, select the tone you wish to associate with

the phone. To block the outgoing caller ID, click the

Anonymous

checkbox. Click

SUBMIT

.

4.

The Phone Settings page allows you to match each phone to a line.To do so, click

EDIT

.

Page 39 / 132

VoIP Network Tab

34

5.

In the Phone Name field, select a name to associate with the phone. If you have more than one digital

voice line, in the Assign Number field select which phone line you wish to associate with this phone.

Click

SUBMIT

.

6.

Setup is complete. Click

DONE

to return to the View Voice Network page.

Page 40 / 132

35

Firewall Tab

This chapter describes the 2Wire gateway firewall features, and provides detailed instructions on how to

modify the firewall settings.

Firewall Features

The 2Wire gateway has a professional-grade firewall to help prevent unauthorized users from accessing

your local network. The 2Wire gateway firewall includes the following features:

Stateful packet inspection.

Blocks common Denial of Service attacks (such as SYN/FIN flooding or Smurf),

and detects and logs TCP and UDP port scans.

Stateless packet inspection.

Filters specific NetBios traffic, suspicious packets and IP fragments; blocks

packets sent from the private network to the Internet that have spoofed IP addresses.

Network Address Translation (NAT).

Translates a local network’s IP address to an external address

maintained by the 2Wire gateway, effectively “hiding” the existence of a home network to the Internet. The

2Wire gateway then uses this external address to communicate with the Internet on behalf of devices

connected to the local network.

Port Address Translation (PAT).

A function provided by some routers which allows hosts on a LAN to

communicate with the rest of a network (such as the Internet) without revealing their own private IP

address. All outbound packets have their IP address translated to the router’s external IP address. Replies

come back to the router, which then translates them back into the private IP address of the original host for

final delivery. During PAT, each computer on the LAN is translated to the same IP address, but with a

different port number assignment.

Inbound and outbound port blocking.

Blocks common inbound and outbound protocol types from passing

information to or receiving information from the Internet.

Rate

Popular 2Wire Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share