Firewall Tab

51

•

Click the Advanced Settings

link under the tab to open the Edit Advanced Firewall Settings page.

Figure 23. Edit Advanced Firewall Settings Page

1.

In the Attack Detection panel, deselect the appropriate checkbox.

2.

Click

SAVE

.

52

Management and Diagnostic Console

This chapter describes the 2Wire gateway Management and Diagnostic Console (MDC). The Management

and Diagnostic Console provides information about the status of the 2Wire gateway, its broadband network

connections, attached home networking devices, system and security information, and a running log of any

error conditions.

You can use the tools provided to:

•

View configuration and service provisioning information.

•

View operation logs.

•

Perform diagnostic tests.

•

Configure the gateway.

The following sections describe how to access the Management and Diagnostic Console, use the

diagnostic and configuration tools, and modify settings.

Accessing the MDC

To access the MDC from your in-home or office network, enter the following URL:

Using the MDC

After you access the Management and Diagnostic Console, a navigation bar allows you to quickly select

pages on the site. The navigation bar consists of the following links:

Note:

The MDC pages available are dependent on the 2Wire gateway software release. The

MDC pages shown in this chapter are for 2Wire gateways running software release 4.21.x If

your gateway is running a software release earlier than 4.21.x, some of these pages may not

be available.

Group

Link

Summary

System Summary

Broadband Link

Summary

Statistics

Detailed Statistics

Configure

Local Network

Status

Statistics

Management and Diagnostic Console

53

Local Network

Device List

Wireless

Configure

Address Allocation

Firewall

Settings

Detailed Information

Advanced Settings

Voice

Configure Server

Troubleshooting

DSL Diagnostics

Event Log

Network Tests

Upgrade History

Resets

Advanced

Syslog Settings

Provisioning Info

Configure Time Services

Configure Services

Static Routes

DNS Resolve

Traffic Shaping

Link Manager

Detailed Log

Note:

The link groups that display are dependent on the 2Wire gateway model. For example,

DSL Diagnostics will display only if a user has a gateway that connects to the Internet via DSL.

Group

Link

Management and Diagnostic Console

54

System Summary Page

The System Summary page shows general information about the 2Wire gateway, its configuration, and

components. For example, it shows the hardware and software version being used by the 2Wire gateway.

Broadband Link Pages

The Broadband Link pages show summary, detailed status, and statistical information about the 2Wire

gateway broadband link; and lets you change configuration settings. For example, the Statistics page shows

current upstream and downstream DSL data rates.

Local Network Pages

Local Network pages show the general operating status of the home network, and statistics associated

with network interfaces. For example, the Statistics page shows the transmit and receive packet count for

Ethernet, Wireless, HomePNA, and USB interfaces.

Firewall Pages

Firewall pages allow you to access settings and detailed information for the gateway’s firewall, and to

configure the firewall if necessary. For example, you can use the Firewall Settings page to access

applications that are usually blocked by the firewall.

Troubleshooting Pages

Troubleshooting pages allow you to view detailed logs that maintain a record of all significant 2Wire gateway

events, and to perform diagnostic tests. For example, if you are experiencing connection problems you can

use the Ping tool on the WAN Tests page to ensure that the 2Wire gateway can “ping” a designated IP

address.

Advanced Pages

Advanced pages provide detailed information and sophisticated diagnostics that, in general, should only be

accessed by technically advanced users.

Management and Diagnostic Console

55

Remote Management Feature

Management and Diagnostic Console pages that affect gateway configuration can be accessed remotely

only

if your organization has enabled the Remote Management feature. If the feature is not enabled, an

error message will display when you click the link to access the following pages.

•

Broadband Link - Configuration

•

Local Network - Configuration

•

Local Network - Address Allocation

•

Firewall - Settings

•

Firewall - Detailed Information

•

Firewall - Advanced Settings

•

Troubleshooting - Configure Logs

•

Troubleshooting - Resets

•

Advanced - Syslog Settings

•

Advanced - Configure Time Services

•

Advanced - Configure Services

•

Advanced - Static Routes

•

Advanced - DNS Resolve

•

Advanced - Traffic Shaping

The following section shows Management and Diagnostic Console pages and describes how to use the

information provided to troubleshoot the 2Wire gateway.