Page 31 / 216 Scroll up to view Page 26 - 30
31
Tab Bar
The tab bar is located at the top of every page, allowing you to move freely about the site.
The tabs reveal a succession of pages that allow you to manage or configure several features of your Gateway.
Each tab is described in its own section.
Help
Help is provided in your Gateway. Help is available in the right hand frame on every page in the Web interface.
Here is an example:
The page shown here is displayed when you are on the
System Information
page.
Page 32 / 216
Administrator’s Handbook
32
Links Bar
The links bar at the top of each page allows you to configure different aspects of the features displayed on the
page. For example, on the Home Summary page, the button bar is shown below:
Click the links below to be taken to each section.
Device Status page
” on page
27
Device List
” on page
32
System Information
” on page
34
Access Code
” on page
35
Restart Device
” on page
36
Link: Device List
When you click the
Device List
link, the
Device List
page appears.
The page displays the following information:
Home Network Devices
Home Network Devices
Displays the IPv4 Address, Network Name, and MAC Address of
devices connected to this device on your local area network.
MAC Address
Client device’s unique hardware address.
IPv4 Address / Name
Client device’s IP address or device network name.
Last Activity
Date and time of last traffic for this client device
Status
May be off or on.
Allocation
Type of IP address assignment, for example, Static or DHCP.
Connection Type
Type of connection, for example, Ethernet or Wireless
Page 33 / 216
33
For Wireless client connections, the Device List displays the familiar bars indicating signal strength, as follows:
Click the
Clear Device List
button to update the Home Network summary.
Click the
Scan for Devices
button to seek out other devices that have been connected since the last Home
Network summary update.
Page 34 / 216
Administrator’s Handbook
34
Link: System Information
When you click the
System Information
link, the
System Information
page appears.
The page displays the following information:
System Information
Manufacturer
This is the manufacturer’s identifier name.
Model Number
This is the manufacturer’s model number.
Serial Number
This is the unique serial number of your Gateway.
Software Version
This is the version number of the current embedded software in your Gateway.
MAC Address
Unique hardware address of this Gateway unit.
First Use Date
Date and Time when the Gateway is first used. This field changes to the cur-
rent date and time after a reset to factory defaults.
Time Since Last Reboot
Elapsed time since last reboot of the Gateway in days:hr:min:sec.
Datapump Version
Underlying operating system software datapump version
Legal Disclaimer
Clicking the
Licenses
link displays a listing of software copyright attributions
also shown here:
Cop
yr
ight Ac
kno
wledgments
on page
183
.
Page 35 / 216
35
Link: Access Code
Access to your Gateway is controlled through an account named
Admin
. The default Admin password for your
Gateway is the unique Access Code printed on the label on the side of your Gateway.
As the Admin, you can change this password to a different one of your own choosing between 8 and 20 characters
long. The new password must also include two characters from any these categories: alpha, number, and special
characters.
Example
: “fru1tfl13s_likeabanana”
Enter your Old Access Code, your New Access Code, and click the
Use New Access Code
button. The new
Access Code takes effect immediately.
You can always return to the original default password by clicking the
Use Default Access Code
button.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top