1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. ZyWALL-USG50
    5. /
  5. 132
Page 656 / 944 Scroll up to view Page 651 - 655
Chapter 42 ISP Accounts
ZyWALL USG 50 User’s Guide
656
The following table describes the labels in this screen. See
the ISP Account Edit
section
below for more information as well.
42.2.1
ISP Account Edit
The
ISP Account Edit
screen lets you add information about new accounts and
edit information about existing accounts. To open this window, open the
ISP
Account
screen. (See
Section 42.2 on page 655
.) Then, click on an
Add
icon or
Edit
icon to open the
ISP Account Edit
screen below.
Figure 374
Configuration > Object > ISP Account > Edit
Table 203
Configuration > Object > ISP Account
LABEL
DESCRIPTION
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click
Edit
to be able to modify the
entry’s settings.
Remove
To remove an entry, select it and click
Remove
. The ZyWALL confirms
you want to remove it before doing so.
Object
References
Select an entry and click
Object Reference
s to open a screen that
shows which settings use the entry. See
Section 11.3.2 on page 230
for
an example.
#
This field is a sequential value, and it is not associated with a specific
entry.
Profile Name
This field displays the profile name of the ISP account. This name is used
to identify the ISP account.
Protocol
This field displays the protocol used by the ISP account.
Authentication
Type
This field displays the authentication type used by the ISP account.
User Name
This field displays the user name of the ISP account.
Page 657 / 944
Chapter 42 ISP Accounts
ZyWALL USG 50 User’s Guide
657
The following table describes the labels in this screen.
Table 204
Configuration > Object > ISP Account > Edit
LABEL
DESCRIPTION
Profile Name
This field is read-only if you are editing an existing account. Type in the
profile name of the ISP account. The profile name is used to refer to the
ISP account. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
Protocol
This field is read-only if you are editing an existing account. Select the
protocol used by the ISP account. Options are:
pppoe
- This ISP account uses the PPPoE protocol.
pptp
- This ISP account uses the PPTP protocol.
Authentication
Type
Use the drop-down list box to select an authentication protocol for
outgoing calls. Options are:
CHAP/PAP
- Your ZyWALL accepts either CHAP or PAP when requested
by this remote node.
CHAP
- Your ZyWALL accepts CHAP only.
PAP
- Your ZyWALL accepts PAP only.
MSCHAP
- Your ZyWALL accepts MSCHAP only.
MSCHAP-V2
- Your ZyWALL accepts MSCHAP-V2 only.
Encryption
Method
This field is available if this ISP account uses the
PPTP
protocol. Use the
drop-down list box to select the type of Microsoft Point-to-Point
Encryption (MPPE). Options are:
nomppe
- This ISP account does not use MPPE.
mppe-40
- This ISP account uses 40-bit MPPE.
mppe-128
- This ISP account uses 128-bit MMPE.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above. The password
can only consist of alphanumeric characters (A-Z, a-z, 0-9). This field
can be blank.
Retype to
Confirm
Type your password again to make sure that you have entered is
correctly.
Server IP
If this ISP account uses the PPPoE protocol, this field is not displayed.
If this ISP account uses the PPTP protocol, type the IP address of the
PPTP server.
Connection ID
This field is available if this ISP account uses the
PPTP
protocol. Type
your identification name for the PPTP server. This field can be blank.
Service Name
If this ISP account uses the PPPoE protocol, type the PPPoE service name
to access. PPPoE uses the specified service name to identify and reach
the PPPoE server. This field can be blank.
If this ISP account uses the PPTP protocol, this field is not displayed.
Page 658 / 944
Chapter 42 ISP Accounts
ZyWALL USG 50 User’s Guide
658
Compression
Select
On
button to turn on stac compression, and select
Off
to turn off
stac compression. Stac compression is a data compression technique
capable of compressing data by a factor of about four.
Idle Timeout
This value specifies the number of seconds that must elapse without
outbound traffic before the ZyWALL automatically disconnects from the
PPPoE/PPTP server. This value must be an integer between 0 and 360. If
this value is zero, this timeout is disabled.
OK
Click
OK
to save your changes back to the ZyWALL. If there are no
errors, the program returns to the
ISP Account
screen. If there are
errors, a message box explains the error, and the program stays in the
ISP Account Edit
screen.
Cancel
Click
Cancel
to return to the
ISP Account
screen without creating the
profile (if it is new) or saving any changes to the profile (if it already
exists).
Table 204
Configuration > Object > ISP Account > Edit (continued)
LABEL
DESCRIPTION
Page 659 / 944
ZyWALL USG 50 User’s Guide
659
C
HAPTER
43
SSL Application
43.1
Overview
You use SSL application objects in SSL VPN. Configure an SSL application object to
specify the type of application and the address of the local computer, server, or
web site SSL users are to be able to access. You can apply one or more SSL
application objects in the
VPN > SSL VPN
screen for a user account/user group.
43.1.1
What You Can Do in this Chapter
•
Use the
SSL Application
screen (
Section 43.2 on page 661
) to view the
ZyWALL’s configured SSL application objects.
•
Use the
SSL Application Edit
screen to create or edit web-based application
objects to allow remote users to access an application via standard web
browsers (
Section 43.2.1 on page 662
).
•
You can also use the
SSL Application Edit
screen to specify the name of a
folder on a Linux or Windows file server which remote users can access using a
standard web browser (
Section 43.2.1 on page 662
).
43.1.2
What You Need to Know
Application Types
You can configure the following SSL application on the ZyWALL.
• Web-based
A web-based application allows remote users to access an intranet site using
standard web browsers.
Remote User Screen Links
Available SSL application names are displayed as links in remote user screens.
Depending on the application type, remote users can simply click the links or
follow the steps in the pop-up dialog box to access.
Page 660 / 944
Chapter 43 SSL Application
ZyWALL USG 50 User’s Guide
660
Remote Desktop Connections
Use SSL VPN to allow remote users to manage LAN computers. Depending on the
functions supported by the remote desktop software, they can install or remove
software, run programs, change settings, and open, copy, create, and delete files.
This is useful for troubleshooting, support, administration, and remote access to
files and programs.
The LAN computer to be managed must have VNC (Virtual Network Computing) or
RDP (Remote Desktop Protocol) server software installed. The remote user’s
computer does not use VNC or RDP client software. The ZyWALL works with the
following remote desktop connection software:
RDP
•
Windows Remote Desktop (supported in Internet Explorer)
VNC
• RealVNC
• TightVNC
• UltraVNC
For example, user A uses an SSL VPN connection to log into the ZyWALL. Then he
manages LAN computer B which has RealVNC server software installed.
Figure 375
SSL-protected Remote Management
Weblinks
You can configure weblink SSL applications to allow remote users to access web
sites.
43.1.3
Example: Specifying a Web Site for Access
This example shows you how to create a web-based application for an internal
web site. The address of the web site is http://info with web page encryption.
1
Click
Configuration > Object > SSL Application
in the navigation panel.
https://
A
SSL
B

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top