Page 131 / 152
Scroll up to view Page 126 - 130
129
Current
All existing public IP address and private IP
DMZ Table (7):
address mapping will be displayed here.
Delete (8):
If you want to delete a specific DMZ entry, check
the ‘select’ box of the DMZ entry you want to delete, then
click ‘Delete Selected’ button. (You can select more than
one DMZ entry).
Delete All (9):
If you want to delete all DMZ entries listed here, please
click ‘Delete All’ button.
Reset (10):
You can also click ‘Reset’ button to unselect all DMZ
entries.
After you finish with all settings, please click ‘Apply’ (11) button and the
following message will be displayed on your web browser:
Please click ‘Continue’ to return to the previous setup menu and continue with
other setup procedures, or click ‘Apply’ to reboot the router so the settings will
take effect (Please wait about 40 seconds for router to reboot).
If you want to reset all settings on this page back to their previously-saved
values, please click the ‘Cancel’ button.
Page 132 / 152
130
9.4 System Status
The functions described here will provide you with the system related
information. To enter system status menu, please click either the ‘Status’ link
located at the upper-right corner of the web management interface, or click the
‘Status’ button in the main menu.
Page 133 / 152
131
9.4.1 System information and firmware version
You can use this function to find the system information and firmware version
of this router.
Please click ‘Status’ link located in the upper-right corner of the web
management interface, and the following message will be displayed on your
web browser
9.4.2 Internet Connection Status
You can use this function to find the status of your current Internet connection.
Please click ‘Internet Connection’ menu on the left of the web management
interface, and the following message will be displayed on your web browser:
NOTE: Information displayed here may vary.
Page 134 / 152
132
This information will vary depending on the connection status.
9.4.3 Device Status
You can use this function to find the status of your router.
Please click ‘Device Status’ menu on the left of the web management interface,
and the following message will be displayed on your web browser:
Page 135 / 152
133
This information will vary depending on the device status.
9.4.4 System Log
All important system events are logged. You can use this function to check the
event log of your router.
Please click ‘System Log’ menu on the left of the web management interface,