VSG1432-B101 Series

11

1.

In your browser, if the VSG1432-B101 does not automatically re-

direct you to the login screen, go to

.

2.

Enter the default user name

admin

and password

1234.

Click

Login

.

#

If the login screen does not open, make sure you allow web

browser pop-up windows, JavaScripts and Java

permissions. Your computer should be also set to get an IP

address automatically from a DHCP server. See the

appendices in your User’s Guide for more information.

3.

A welcome screen appears with details about your last login. Select

Show this page next time

to see the welcome screen on your next

login. Otherwise, clear it. Click

Continue

.

12

4.

In the next screen, you can change the login password. This is

recommended. Enter your new password in the

New Password

field.

Re-type your new password in the second field and then click

Apply

.

If you prefer not to change the password, leave the two fields blank

and click

Skip

.

You can write down your new password in the following space.

New Password:

_________________________

VSG1432-B101 Series

13

5.

The

Network Map

page appears. This shows whether the VSG1432-

B101 and computers/devices connected to it have Internet access.

6.

Click

Status

to display the following screen, where you can view the

VSG1432-B101’s device, interface, and system information.

14

7.

Click

Quick Start

and configure the VSG1432-B101’s time zone

Internet access, and wireless settings.

See your User’s Guide for how to use the rest of the Web Configurator

screens. You will need to refer to the section on how to setup the

Broadband

connection if the

INTERNET

LED (light) remains off.

Viewing Certifications

•

Go to www.zyxel.com.

•

Select your product from the drop-down list box on the ZyXEL home

page to go to that product's page.

•

Select the certification you wish to view from this page or click on

the

Specifications

tab to see the certifications list.

VSG1432-B101 Series

15

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

For a Class B digital device or peripheral, the instructions furnished the user shall include

the following or similar statement, placed in a prominent location in the text of the

manual:

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

RF exposure warning

This equipment must be installed and operated in accordance with provided instructions

and the antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 20 cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmitter. End-users and installers must be

provide with antenna installation instructions and transmitter operating conditions for

satisfying RF exposure compliance.