Page 346 / 412
Scroll up to view Page 341 - 345
Appendix B Setting up Your Computer’s IP Address
VMG8924-B10A and VMG8924-B30A Series User’s Guide
346
6
Select
Internet Protocol Version 4 (TCP/IPv4)
and click
Properties
.
Figure 209
Windows Vista: Local Area Connection Properties
7
The
Internet Protocol Version 4 (TCP/IPv4) Properties
window opens (the
General tab
).
•
If you have a dynamic IP address click
Obtain an IP address automatically
.
•
If you have a static IP address click
Use the following IP address
and fill in the
IP address
,
Subnet mask
, and
Default gateway
fields.
Page 347 / 412
Appendix B Setting up Your Computer’s IP Address
VMG8924-B10A and VMG8924-B30A Series User’s Guide
347
• Click
Advanced
.
Figure 210
Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
8
If you do not know your gateway's IP address, remove any previously installed gateways in the
IP
Settings
tab and click
OK
.
Do one or more of the following if you want to configure additional IP addresses:
•
In the
IP Settings
tab, in IP addresses, click
Add
.
• In
TCP/IP Address
, type an IP address in
IP address
and a subnet mask in
Subnet mask
,
and then click
Add
.
•
Repeat the above two steps for each IP address you want to add.
•
Configure additional default gateways in the
IP Settings
tab by clicking
Add
in
Default
gateways
.
• In
TCP/IP Gateway Address
, type the IP address of the default gateway in
Gateway
. To
manually configure a default metric (the number of transmission hops), clear the
Automatic
metric
check box and type a metric in
Metric
.
• Click
Add
.
•
Repeat the previous three steps for each default gateway you want to add.
Page 348 / 412
Appendix B Setting up Your Computer’s IP Address
VMG8924-B10A and VMG8924-B30A Series User’s Guide
348
• Click
OK
when finished.
Figure 211
Windows Vista: Advanced TCP/IP Properties
9
In the
Internet Protocol Version 4 (TCP/IPv4) Properties
window, (the
General tab
):
• Click
Obtain DNS server address automatically
if you do not know your DNS server IP
address(es).
•
If you know your DNS server IP address(es), click
Use the following DNS server
addresses
, and type them in the
Preferred DNS
server
and
Alternate DNS server
fields.
Page 349 / 412
Appendix B Setting up Your Computer’s IP Address
VMG8924-B10A and VMG8924-B30A Series User’s Guide
349
If you have previously configured DNS servers, click
Advanced
and then the
DNS
tab to order
them.
Figure 212
Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
10
Click
OK
to close the
Internet Protocol Version 4 (TCP/IPv4) Properties
window.
11
Click
Close
to close the
Local Area Connection Properties
window.
12
Close the
Network Connections
window.
13
Turn on your Device and restart your computer (if prompted).
Verifying Settings
1
Click
Start
,
All Programs
,
Accessories
and then
Command Prompt
.
2
In the
Command Prompt
window, type "ipconfig" and then press [ENTER]. You can also open
Network Connections
, right-click a network connection, click
Status
and then click the
Support
tab.
Page 350 / 412
Appendix B Setting up Your Computer’s IP Address
VMG8924-B10A and VMG8924-B30A Series User’s Guide
350
Macintosh OS 8/9
1
Click the
Apple
menu,
Control Panel
and double-click
TCP/IP
to open the
TCP/IP Control
Panel
.
Figure 213
Macintosh OS 8/9: Apple Menu
19216811.live