Page 341 / 412
Scroll up to view Page 336 - 340
Appendix B Setting up Your Computer’s IP Address
VMG8924-B10A and VMG8924-B30A Series User’s Guide
341
• Click
Advanced
.
Figure 201
Windows XP: Internet Protocol (TCP/IP) Properties
6
If you do not know your gateway's IP address, remove any previously installed gateways in the
IP
Settings
tab and click
OK
.
Do one or more of the following if you want to configure additional IP addresses:
•
In the
IP Settings
tab, in IP addresses, click
Add
.
• In
TCP/IP Address
, type an IP address in
IP address
and a subnet mask in
Subnet mask
,
and then click
Add
.
•
Repeat the above two steps for each IP address you want to add.
•
Configure additional default gateways in the
IP Settings
tab by clicking
Add
in
Default
gateways
.
• In
TCP/IP Gateway Address
, type the IP address of the default gateway in
Gateway
. To
manually configure a default metric (the number of transmission hops), clear the
Automatic
metric
check box and type a metric in
Metric
.
• Click
Add
.
•
Repeat the previous three steps for each default gateway you want to add.
Page 342 / 412
Appendix B Setting up Your Computer’s IP Address
VMG8924-B10A and VMG8924-B30A Series User’s Guide
342
• Click
OK
when finished.
Figure 202
Windows XP: Advanced TCP/IP Properties
7
In the
Internet Protocol TCP/IP Properties
window (the
General
tab in Windows XP):
• Click
Obtain DNS server address automatically
if you do not know your DNS server IP
address(es).
•
If you know your DNS server IP address(es), click
Use the following DNS server
addresses
, and type them in the
Preferred DNS
server
and
Alternate DNS server
fields.
Page 343 / 412
Appendix B Setting up Your Computer’s IP Address
VMG8924-B10A and VMG8924-B30A Series User’s Guide
343
If you have previously configured DNS servers, click
Advanced
and then the
DNS
tab to order
them.
Figure 203
Windows XP: Internet Protocol (TCP/IP) Properties
8
Click
OK
to close the
Internet Protocol (TCP/IP) Properties
window.
9
Click
Close
(
OK
in Windows 2000/NT) to close the
Local Area Connection Properties
window.
10
Close the
Network Connections
window (
Network and Dial-up Connections
in Windows
2000/NT).
11
Turn on your Device and restart your computer (if prompted).
Verifying Settings
1
Click
Start
,
All Programs
,
Accessories
and then
Command Prompt
.
2
In the
Command Prompt
window, type "ipconfig" and then press [ENTER]. You can also open
Network Connections
, right-click a network connection, click
Status
and then click the
Support
tab.
Windows Vista
This section shows screens from Windows Vista Enterprise Version 6.0.
Page 344 / 412
Appendix B Setting up Your Computer’s IP Address
VMG8924-B10A and VMG8924-B30A Series User’s Guide
344
1
Click the
Start
icon,
Control Panel
.
Figure 204
Windows Vista: Start Menu
2
In the
Control Panel
, double-click
Network and Internet
.
Figure 205
Windows Vista: Control Panel
3
Click
Network and Sharing Center
.
Figure 206
Windows Vista: Network And Internet
Page 345 / 412
Appendix B Setting up Your Computer’s IP Address
VMG8924-B10A and VMG8924-B30A Series User’s Guide
345
4
Click
Manage network connections
.
Figure 207
Windows Vista: Network and Sharing Center
5
Right-click
Local Area Connection
and then click
Properties
.
Note: During this procedure, click
Continue
whenever Windows displays a screen saying
that it needs your permission to continue.
Figure 208
Windows Vista: Network and Sharing Center
19216811.live