1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. VMG8324-B10A
    5. /
  5. 60
Page 296 / 404 Scroll up to view Page 291 - 295
Chapter 32 TR-069 Client
VMG8324-B10A / VMG8324-B30A Series User’s Guide
296
The following table describes the fields in this screen.
Table 142
Maintenance > TR-069 Client
LABEL
DESCRIPTION
Inform
Select
Enable
for the Device to send periodic inform via TR-069 on the WAN. Otherwise,
select
Disable
.
Inform Interval
Enter the time interval (in seconds) at which the Device sends information to the auto-
configuration server.
ACS URL
Enter the URL or IP address of the auto-configuration server.
ACS User Name
Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password
Enter the TR-069 password for authentication with the auto-configuration server.
WAN Interface
used by TR-069
client
Select a WAN interface through which the TR-069 traffic passes.
If you select
Any_WAN
, the Device automatically passes the TR-069 traffic when any WAN
connection is up.
If you select
Multi_WAN
, you also need to select two or more pre-configured WAN
interfaces. The Device automatically passes the TR-069 traffic when one of the selected WAN
connections is up.
Display SOAP
messages on
serial console
Select
Enable
to show the SOAP messages on the console.
Connection
Request
Authentication
Select this option to enable authentication when there is a connection request from the ACS.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the Device, this user name is used to
authenticate the ACS.
Connection
Request
Password
Enter the connection request password.
When the ACS makes a connection request to the Device, this password is used to
authenticate the ACS.
Connection
Request URL
This shows the connection request URL.
The ACS can use this URL to make a connection request to the Device.
Local certificate
used by TR-069
client
You can choose a local certificate used by TR-069 client. The local certificate should be
imported in the
Security
>
Certificates
>
Local Certificates
screen.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Page 297 / 404
VMG8324-B10A / VMG8324-B30A Series User’s Guide
297
C
HAPTER
33
TR-064
33.1
Overview
This chapter explains how to configure the Device’s TR-064 auto-configuration settings.
33.2
The TR-064 Screen
TR-064 is a LAN-Side DSL CPE Configuration protocol defined by the DSL Forum. TR-064 is built on
top of UPnP. It allows the users to use a TR-064 compliant CPE management application on their
computers from the LAN to discover the CPE and configure user-specific parameters, such as the
username and password.
Click
Maintenance > TR-064
to open the following screen.
Figure 173
Maintenance > TR-064
The following table describes the fields in this screen.
Table 143
Maintenance > TR-064
LABEL
DESCRIPTION
State
Select
Enable
to activate management via TR-064 on the LAN.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Page 298 / 404
Chapter 33 TR-064
VMG8324-B10A / VMG8324-B30A Series User’s Guide
298
Page 299 / 404
VMG8324-B10A / VMG8324-B30A Series User’s Guide
299
C
HAPTER
34
SNMP
34.1
Overview
This chapter explains how to configure the SNMP settings on the Device.
34.2
The SNMP Screen
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your Device supports SNMP agent functionality, which allows a manager
station to manage and monitor the Device through the network. The Device supports SNMP version
one (SNMPv1) and version two (SNMPv2c). The next figure illustrates an SNMP management
operation.
Figure 174
SNMP Management Model
An SNMP managed network consists of two main types of component: agents and a manager.
An agent is a management software module that resides in a managed device (the Device). An
agent translates the local management information from the managed device into a form
compatible with SNMP. The manager is the console through which network administrators perform
network management functions. It executes applications that control and monitor managed
devices.
The managed devices contain object variables/managed objects that define each piece of
information to be collected about a device. Examples of variables include such as number of
packets received, node port status etc. A Management Information Base (MIB) is a collection of
Page 300 / 404
Chapter 34 SNMP
VMG8324-B10A / VMG8324-B30A Series User’s Guide
300
managed objects. SNMP allows a manager and agents to communicate for the purpose of accessing
these objects.
SNMP itself is a simple request/response protocol based on the manager/agent model. The
manager issues a request and the agent returns responses using the following protocol operations:
•
Get - Allows the manager to retrieve an object variable from the agent.
•
GetNext - Allows the manager to retrieve the next object variable from a table or list within an
agent. In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it
initiates a Get operation, followed by a series of GetNext operations.
•
Set - Allows the manager to set values for object variables within an agent.
•
Trap - Used by the agent to inform the manager of some events.
Click
Maintenance > SNMP
to open the following screen. Use this screen to configure the Device
SNMP settings.
Figure 175
Maintenance > SNMP
The following table describes the fields in this screen.
Table 144
Maintenance > SNMP
LABEL
DESCRIPTION
SNMP Agent
Select
Enable
to let the Device act as an SNMP agent, which allows a manager station
to manage and monitor the Device through the network. Select
Disable
to turn this
feature off.
Get Community
Enter the
Get Community
, which is the password for the incoming Get and GetNext
requests from the management station.
Set Community
Enter the
Set community
, which is the password for incoming Set requests from the
management station.
System Name
Enter the SNMP system name.
System Location
Enter the SNMP system location.
System Contact
Enter the SNMP system contact.
Trap Destination
Type the IP address of the station to send your SNMP traps to.
Apply
Click this to save your changes back to the Device.
Cancel
Click this to restore your previously saved settings.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top