1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. VMG8324-B10A
    5. /
  5. 59
Page 291 / 404 Scroll up to view Page 286 - 290
VMG8324-B10A / VMG8324-B30A Series User’s Guide
291
C
HAPTER
31
Remote Management
31.1
Overview
Remote management controls through which interface(s), which services can access the Device.
Note: The Device is managed using the Web Configurator.
31.2
The Remote MGMT Screen
Use this screen to configure through which interface(s), which services can access the Device. You
can also specify the port numbers the services must use to connect to the Device. Click
Maintenance > Remote MGMT
to open the following screen.
Figure 169
Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 139
Maintenance > Remote MGMT
LABEL
DESCRIPTION
WAN Interface
used for
services
Select
Any WAN
to have the Device automatically activate the remote management service
when any WAN connection is up.
Select
Multi WAN
and then select one or more WAN connections to have the Device
activate the remote management service when the selected WAN connections are up.
HTTP
This is the service you may use to access the Device.
LAN/WLAN
Select the
Enable
check box for the corresponding services that you want to allow access to
the Device from the LAN/WLAN.
WAN
Select the
Enable
check box for the corresponding services that you want to allow access to
the Device from the WAN.
Page 292 / 404
Chapter 31 Remote Management
VMG8324-B10A / VMG8324-B30A Series User’s Guide
292
31.3
The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the Device through
the services configured in the
Maintenance > Remote MGMT
screen. Click
Maintenance >
Remote MGMT > Turst Domain
to open the following screen.
Note: If this list is empty, all public IP addresses can access the Device from the WAN
through the specified services.
Figure 170
Maintenance > Remote MGMT > Trust Domain
The following table describes the fields in this screen.
Port
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Certificate
HTTPS
Certificate
Select a certificate the HTTPS server (the Device) uses to authenticate itself to the HTTPS
client. You must have certificates already configured in the
Certificates
screen.
Apply
Click
Apply
to save your changes back to the Device.
Cancel
Click
Cancel
to restore your previously saved settings.
Table 139
Maintenance > Remote MGMT
(continued)
LABEL
DESCRIPTION
Table 140
Maintenance > Remote MGMT > Trust Domain
LABEL
DESCRIPTION
Add Trust
Domain
Click this to add a trusted host IP address.
IPv4 Address
This field shows a trusted host IP address.
Delete
Click the
Delete
icon to remove the trust IP address.
Page 293 / 404
Chapter 31 Remote Management
VMG8324-B10A / VMG8324-B30A Series User’s Guide
293
31.4
The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the Device. Click the
Add
Trust Domain
button in the
Maintenance > Remote MGMT > Turst Domain
screen to open the
following screen.
Figure 171
Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
The following table describes the fields in this screen.
Table 141
Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
LABEL
DESCRIPTION
IPv4 Address
Enter a public IPv4 IP address which is allowed to access the service on the Device from the
WAN.
Apply
Click
Apply
to save your changes back to the Device.
Cancel
Click
Cancel
to restore your previously saved settings.
Page 294 / 404
Chapter 31 Remote Management
VMG8324-B10A / VMG8324-B30A Series User’s Guide
294
Page 295 / 404
VMG8324-B10A / VMG8324-B30A Series User’s Guide
295
C
HAPTER
32
TR-069 Client
32.1
Overview
This chapter explains how to configure the Device’s TR-069 auto-configuration settings.
32.2
The TR-069 Client Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your Device, can be managed
over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending Remote
Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible Markup
Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the Device, modify settings, perform firmware
upgrades as well as monitor and diagnose the Device. You have to enable the device to be managed
by the ACS and specify the ACS IP address or domain name and username and password.
Click
Maintenance > TR-069 Client
to open the following screen. Use this screen to configure
your Device to be managed by an ACS.
Figure 172
Maintenance > TR-069 Client

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top