Page 41 / 367
Scroll up to view Page 36 - 40
Chapter 4 Tutorials
VMG4380-B10A / VMG4325-B10A User’s Guide
41
Note: Your Device has a WPS button located on its front panel as well as a WPS button in
its configuration utility. Both buttons have exactly the same function: you can use
one or the other.
Note: It doesn’t matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The Device sends the proper configuration settings to the wireless client. This may take up to two
minutes. The wireless client is then able to communicate with the Device securely.
The following figure shows you an example of how to set up a wireless network and its security by
pressing a button on both Device and wireless client.
Example WPS Process: PBC Method
Wireless Client
Device
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
Press and hold for
5 seconds
WLAN/
WPS
Page 42 / 367
Chapter 4 Tutorials
VMG4380-B10A / VMG4325-B10A User’s Guide
42
PIN Configuration
When you use the PIN configuration method, you need to use both the Device’s web configurator
and the wireless client’s utility.
1
Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
2
Log into Device’s web configurator and go to the
Network Setting > Wireless >
WPS
screen.
Enable the WPS function and click
Apply
.
3
Enter the PIN number of the wireless client and click the
Register
button. Activate WPS function on
the wireless client utility screen within two minutes.
The Device authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. The wireless client is then able to communicate
with the Device securely.
Page 43 / 367
Chapter 4 Tutorials
VMG4380-B10A / VMG4325-B10A User’s Guide
43
The following figure shows you how to set up a wireless network and its security on a Device and a
wireless client by using PIN method.
Example WPS Process: PIN Method
4.3.3
Without WPS
Use the wireless adapter’s utility installed on the notebook to search for the “Example” SSID. Then
enter the “DoNotStealMyWirelessNetwork” pre-shared key to establish an wireless Internet
connection.
Note: The Device supports IEEE 802.11b and IEEE 802.11g wireless clients. Make sure
that your notebook or computer’s wireless adapter supports one of these
standards.
Authentication by PIN
SECURITY INFO
WITHIN 2 MINUTES
Wireless Client
ZyXEL Device
COMMUNICATION
Page 44 / 367
Chapter 4 Tutorials
VMG4380-B10A / VMG4325-B10A User’s Guide
44
4.4
Setting Up Multiple Wireless Groups
Company A wants to create different wireless network groups for different types of users as shown
in the following figure. Each group has its own SSID and security mode.
•
Employees in Company A will use a general
Company
wireless network group.
•
Higher management level and important visitors will use the
VIP
group.
•
Visiting guests will use the
Guest
group, which has a lower security mode.
Company A will use the following parameters to set up the wireless network groups.
COMPANY
VIP
GUEST
SSID
Company
VIP
Guest
Security Level
More Secure
More Secure
Basic
Security Mode
WPA2-PSK
WPA2-PSK
Static WEP
Pre-Shared Key
ForCompanyOnly
ForVIPOnly
Guest12345678
Company
VIP
Guest
Page 45 / 367
Chapter 4 Tutorials
VMG4380-B10A / VMG4325-B10A User’s Guide
45
1
Click
Network Setting >
Wireless
to open the
General
screen. Use this screen to set up the
company’s general wireless network group. Configure the screen using the provided parameters
and click
Apply
.
2
Click
Network Setting >
Wireless
>
More AP
to open the following screen. Click the
Edit
icon to
configure the second wireless network group.
19216811.live