Zyxel VMG4325-B10A Router Manual PDF (Setup & Configuration Guide)

Page 46 / 367 Scroll up to view Page 41 - 45

Chapter 4 Tutorials

VMG4380-B10A / VMG4325-B10A User’s Guide

46

3

Configure the screen using the provided parameters and click

Apply

.

4

In the

More AP

screen, click the

Edit

icon to configure the third wireless network group.

Page 47 / 367

Chapter 4 Tutorials

VMG4380-B10A / VMG4325-B10A User’s Guide

47

5

Configure the screen using the provided parameters and click

Apply

.

6

Check the status of

VIP

and

Guest

in the

More AP

screen. The yellow bulbs signify that the SSIDs

are active and ready for wireless access.

4.5

Configuring Static Route for Routing to Another

Network

In order to extend your Intranet and control traffic flowing directions, you may connect a router to

the Device’s LAN. The router may be used to separate two department networks. This tutorial

shows how to configure a static routing rule for two network routings.

In the following figure, router

R

is connected to the Device’s LAN.

R

connects to two networks,

N1

(192.168.1.x/24) and

N2

(192.168.10.x/24). If you want to send traffic from computer

A

(in

N1

Page 48 / 367

Chapter 4 Tutorials

VMG4380-B10A / VMG4325-B10A User’s Guide

48

network) to computer

B

(in

N2

network), the traffic is sent to the Device’s WAN default gateway by

default. In this case,

B

will never receive the traffic.

You need to specify a static routing rule on the Device to specify

R

as the router in charge of

forwarding traffic to

N2

. In this case, the Device routes traffic from

A

to

R

and then

R

routes the

traffic to

B

.

This tutorial uses the following example IP settings:

Table 4

IP Settings in this Tutorial

DEVICE / COMPUTER

IP ADDRESS

The Device’s WAN

172.16.1.1

The Device’s LAN

192.168.1.1

IP Type

IPv4

Use Interface

ADSL/atm0

A

192.168.1.34

R

’s N1

192.168.1.253

N2

B

N1

A

R

N2

B

N1

A

R

Page 49 / 367

Chapter 4 Tutorials

VMG4380-B10A / VMG4325-B10A User’s Guide

49

To configure a static route to route traffic from

N1

to

N2

:

1

Log into the Device’s Web Configurator in advanced mode.

2

Click

Network Setting

>

Routing

.

3

Click

Add new static route

in the

Static Route

screen.

4

Configure the

Static Route Setup

screen using the following settings:

4a

Select the

Active

check box. Enter the

Route Name

as

R

.

4b

Set

IP Type

to

IPv4

.

4c

Type

192.168.10.0

and subnet mask

255.255.255.0

for the destination,

N2

.

4d

Select

Enable

in the

Use Gateway IP Address field

. Type

192.168.1.253

(

R

’s N1 address)

in the

Gateway IP Address

field.

4e

Select

ADSL/atm0

as the

Use Interface

.

4a

Click

OK

.

Now

B

should be able to receive traffic from

A

. You may need to additionally configure

B

’s firewall

settings to allow specific traffic to pass through.

R

’s N2

192.168.10.2

B

192.168.10.33

Table 4

IP Settings in this Tutorial

DEVICE / COMPUTER

IP ADDRESS

Page 50 / 367

Chapter 4 Tutorials

VMG4380-B10A / VMG4325-B10A User’s Guide

50

4.6

Configuring QoS Queue and Class Setup

This section contains tutorials on how you can configure the QoS screen.

Let’s say you are a team leader of a small sales branch office. You want to prioritize e-mail traffic

because your task includes sending urgent updates to clients at least twice every hour. You also

upload data files (such as logs and e-mail archives) to the FTP server throughout the day. Your

colleagues use the Internet for research, as well as chat applications for communicating with other

branch offices.

In the following figure, your Internet connection has an upstream transmission bandwidth of

10,000 kbps. For this example, you want to configure QoS so that e-mail traffic gets the highest

priority with at least 5,000 kbps. You can do the following:

•

Configure a queue to assign the highest priority queue (1) to e-mail traffic going to the WAN

interface, so that e-mail traffic would not get delayed when there is network congestion.

•

Note the IP address (192.168.1.23 for example) and/or MAC address (AA:FF:AA:FF:AA:FF for

example) of your computer and map it to queue 7.

Note: QoS is applied to traffic flowing out of the Device.

Traffic that does not match this class is assigned a priority queue based on the internal QoS

mapping table on the Device.

QoS Example

10,000 kbps

DSL

Your computer

IP=192.168.1.23

A colleague’s computer

Other traffic: Automatic classifier

and/or

MAC=AA:FF:AA:FF:AA:FF

Email traffic: Highest priority

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share