19216811.liveChapter 19 Certificates
VMG4380-B10A / VMG4325-B10A User’s Guide
231
19.3.1
Create Certificate Request
Click
Security
>
Certificates
>
Local Certificates
and then
Create Certificate Request
to
open the following screen. Use this screen to have the Device generate a certification request.
Figure 115
Create Certificate Request
The following table describes the labels in this screen.
After you click
Apply
, the following screen displays to notify you that you need to get the certificate
request signed by a Certificate Authority. If you already have, click
Load_Signed
to import the
signed certificate into the Device. Otherwise click
Back
to return to the
Local Certificates
screen.
Table 87
Create Certificate Request
LABEL
DESCRIPTION
Certificate
Name
Type up to 63 ASCII characters (not including spaces) to identify this certificate.
Common Name
Select
Auto
to have the Device configure this field automatically. Or select
Customize
to
enter it manually.
Type the IP address (in dotted decimal notation), domain name or e-mail address in the field
provided. The domain name or e-mail address can be up to 63 ASCII characters. The
domain name or e-mail address is for identification purposes only and can be any string.
Organization
Name
Type up to 63 characters to identify the company or group to which the certificate owner
belongs. You may use any character, including spaces, but the Device drops trailing spaces.
State/Province
Name
Type up to 32 characters to identify the state or province where the certificate owner is
located. You may use any character, including spaces, but the Device drops trailing spaces.
Country/Region
Name
Select a country to identify the nation where the certificate owner is located.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.