Chapter 34 Time Settings
VMG3926-B10A User’s Guide
252
Time and Date Setup
First ~ Fifth Time
Server Address
Select an NTP time server from the drop-down list box.
Otherwise, select
Other
and enter the IP address or URL (up to 29 extended ASCII
characters in length) of your time server.
Select
None
if you don’t want to configure the time server.
Check with your ISP/network administrator if you are unsure of this information.
Time Zone
Time zone
Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
Daylight Savings
Daylight Saving Time is a period from late spring to early fall when many countries set
their clocks ahead of normal local time by one hour to give more daytime light in the
evening.
State
Select
Enable
if you use Daylight Saving Time.
Start Rule
Configure the day and time when Daylight Saving Time starts if you enabled Daylight
Saving. You can select a specific date in a particular month or a specific day of a specific
week in a particular month. The
Time
field uses the 24 hour format. Here are a couple of
examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of
March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M.
local time. So in the United States, set the day to
Second
,
Sunday
, the month to
March
and the time to
2
in the
Hour
field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of the
time zones in the European Union start using Daylight Saving Time at the same moment
(1 A.M. GMT or UTC). So in the European Union you would set the day to
Last
,
Sunday
and the month to
March
. The time you select in the
o'clock
field depends on your time
zone. In Germany for instance, you would select
2
in the
Hour
field because Germany's
time zone is one hour ahead of GMT or UTC (GMT+1).
End Rule
Configure the day and time when Daylight Saving Time ends if you enabled Daylight
Saving. You can select a specific date in a particular month or a specific day of a specific
week in a particular month. The
Time
field uses the 24 hour format. Here are a couple of
examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each
time zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So
in the United States you would set the day to
First
,
Sunday
, the month to
November
and the time to
2
in the
Hour
field.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of the
time zones in the European Union stop using Daylight Saving Time at the same moment
(1 A.M. GMT or UTC). So in the European Union you would set the day to
Last
,
Sunday
,
and the month to
October
. The time you select in the
o'clock
field depends on your time
zone. In Germany for instance, you would select
2
in the
Hour
field because Germany's
time zone is one hour ahead of GMT or UTC (GMT+1).
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Table 117
Maintenance > Time (continued)
LABEL
DESCRIPTION
19216811.live