Page 241 / 327
Scroll up to view Page 236 - 240
VMG3926-B10A User’s Guide
241
C
HAPTER
30
Remote Management
30.1
Overview
Remote management controls through which interface(s), which services can access the VMG.
Note: The VMG is managed using the Web Configurator.
30.2
The Remote MGMT Screen
Use this screen to configure through which interface(s), which services can access the VMG. You
can also specify the port numbers the services must use to connect to the VMG. Click
Maintenance
> Remote MGMT
to open the following screen.
Figure 141
Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 111
Maintenance > Remote MGMT
LABEL
DESCRIPTION
WAN Interface
used for
services
Select
Any_WAN
to have the VMG automatically activate the remote management service
when any WAN connection is up.
Select
Multi_WAN
and then select one or more WAN connections to have the VMG activate
the remote management service when the selected WAN connections are up.
service
This is the service you may use to access the VMG.
LAN/WLAN
Select the
Enable
check box for the corresponding services that you want to allow access to
the VMG from the LAN/WLAN.
WAN
Select the
Enable
check box for the corresponding services that you want to allow access to
the VMG from all WAN connections.
Port
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Page 242 / 327
Chapter 30 Remote Management
VMG3926-B10A User’s Guide
242
30.3
The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the VMG through
the services configured in the
Maintenance > Remote MGMT
screen. Click
Maintenance >
Remote MGMT > Turst Domain
to open the following screen.
Note: If this list is empty, all public IP addresses can access the VMG from the WAN
through the specified services.
Figure 142
Maintenance > Remote MGMT > Trust Domain
The following table describes the fields in this screen.
30.4
The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the VMG. Click the
Add
Trust Domain
button in the
Maintenance > Remote MGMT > Turst Domain
screen to open the
following screen.
Figure 143
Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
Apply
Click
Apply
to save your changes back to the VMG.
Cancel
Click
Cancel
to restore your previously saved settings.
Table 111
Maintenance > Remote MGMT
(continued)
LABEL
DESCRIPTION
Table 112
Maintenance > Remote MGMT > Trust Domain
LABEL
DESCRIPTION
Add Trust
Domain
Click this to add a trusted host IP address.
IP Address
This field shows a trusted host IP address.
Delete
Click the
Delete
icon to remove the trust IP address.
Page 243 / 327
Chapter 30 Remote Management
VMG3926-B10A User’s Guide
243
The following table describes the fields in this screen.
Table 113
Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
LABEL
DESCRIPTION
IP Address
Enter a public IPv4 IP address which is allowed to access the service on the VMG from the
WAN.
OK
Click
OK
to save your changes back to the VMG.
Cancel
Click
Cancel
to restore your previously saved settings.
Page 244 / 327
Chapter 30 Remote Management
VMG3926-B10A User’s Guide
244
Page 245 / 327
VMG3926-B10A User’s Guide
245
C
HAPTER
31
TR-064
31.1
Overview
This chapter explains how to configure the VMG’s TR-064 auto-configuration settings.
31.2
The TR-064 Screen
TR-064 is a LAN-Side DSL CPE Configuration protocol defined by the DSL Forum. TR-064 is built on
top of UPnP. It allows the users to use a TR-064 compliant CPE management application on their
computers from the LAN to discover the CPE and configure user-specific parameters, such as the
username and password.
Click
Maintenance > TR-064
to open the following screen.
Figure 144
Maintenance > TR-064
The following table describes the fields in this screen.
Table 114
Maintenance > TR-064
LABEL
DESCRIPTION
State
Select
Enable
to activate management via TR-064 on the LAN.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
19216811.live