1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. VMG3926-B10A
    5. /
  5. 12
Page 56 / 327 Scroll up to view Page 51 - 55
56
Page 57 / 327
VMG3926-B10A User’s Guide
57
C
HAPTER
5
Network Map and Status Screens
5.1
Overview
After you log into the Web Configurator, the
Network Map
screen appears. This shows the network
connection status of the VMG and clients connected to it.
You can use the
Status
screen to look at the current status of the VMG, system resources, and
interfaces (LAN, WAN, and WLAN).
5.2
The Network Map Screen
Use this screen to view the network connection status of the device and its clients. A warning
message appears if there is a connection problem.
Figure 14
Network Map: Icon View Mode
Page 58 / 327
Chapter 5 Network Map and Status Screens
VMG3926-B10A User’s Guide
58
If you want to view information about a client, click the client’s name and
Info
. Click the IP address
if you want to change it. If you want to change the name or icon of the client, click
Change name/
icon
.
If you prefer to view the status in a list, click
List View
in the
Viewing mode
selection box. You
can configure how often you want the VMG to update this screen in
Refresh interval
.
Figure 15
Network Map: List View Mode
5.3
The Status Screen
Use this screen to view the status of the VMG. Click
Status
to open this screen.
Figure 16
Status Screen
Page 59 / 327
Chapter 5 Network Map and Status Screens
VMG3926-B10A User’s Guide
59
Each field is described in the following table.
Table 5
Status Screen
LABEL
DESCRIPTION
Refresh Interval
Select how often you want the VMG to update this screen.
Device Information
Host Name
This field displays the VMG system name. It is used for identification.
Model Number
This shows the model number of your VMG.
Firmware
Version
This is the current version of the firmware inside the VMG.
WAN Information (These fields display when you have a WAN connection.)
Encapsulation
This field displays the current encapsulation method.
IP Address
This field displays the current IP address of the VMG in the WAN. Click
Release
to
release your IP address to 0.0.0.0. If you want to renew your IP address, click
Renew
.
IP Subnet Mask
This field displays the current subnet mask in the WAN.
MAC Address
This shows the WAN Ethernet adapter MAC (Media Access Control) Address of your VMG.
DHCP
This field displays whether the WAN interface is using a DHCP IP address or a static IP
address. Choices are:
Client
- The WAN interface can obtain an IP address from a DHCP server.
None
- The WAN interface is using a static IP address.
LAN Information
IP Address
This is the current IP address of the VMG in the LAN.
IP Subnet Mask
This is the current subnet mask in the LAN.
DHCP
This field displays what DHCP services the VMG is providing to the LAN. The possible
values are:
Server
- The VMG is a DHCP server in the LAN. It assigns IP addresses to other
computers in the LAN.
Relay
- The VMG
acts as a surrogate DHCP server and relays DHCP requests and
responses between the remote server and the clients.
None
- The VMG is not providing any DHCP services to the LAN.
MAC Address
This shows the LAN Ethernet adapter MAC (Media Access Control) Address of your VMG.
WLAN 2.4G Information / WLAN 5G Information
MAC Address
This shows the wireless adapter MAC (Media Access Control) Address of the wireless
interface.
Status
This displays whether the WLAN is activated.
SSID
This is the descriptive name used to identify the VMG in a wireless LAN.
Channel
This is the channel number used by the wireless interface now.
Security
This displays the type of security mode the wireless interface is using in the wireless
LAN.
802.11 Mode
This displays the type of 802.11 mode the wireless interface is using in the wireless LAN.
WPS
This displays whether WPS is activated on the wireless interface.
Security
Firewall
This displays the firewall’s current security level.
System Status
Page 60 / 327
Chapter 5 Network Map and Status Screens
VMG3926-B10A User’s Guide
60
System Up
Time
This field displays how long the VMG has been running since it last started up. The VMG
starts up when you plug it in, when you restart it (
Maintenance > Reboot
), or when
you reset it.
Current Date/
Time
This field displays the current date and time in the VMG. You can change this in
Maintenance> Time Setting
.
System Resource
CPU Usage
This field displays what percentage of the VMG’s processing ability is currently used.
When this percentage is close to 100%, the VMG is running at full load, and the
throughput is not going to improve anymore. If you want some applications to have
more throughput, you should turn off other applications (for example, using QoS; see
Chapter 10 on page 141
).
Memory Usage
This field displays what percentage of the VMG’s memory is currently used. Usually, this
percentage should not increase much. If memory usage does get close to 100%, the
VMG is probably becoming unstable, and you should restart the device. See
Section 38.2
on page 263
, or turn off the device (unplug the power) for a few seconds.
NAT Session
Usage
This field displays what percentage of the VMG supported NAT sessions are currently
being used. This field also displays the number of active NAT sessions and the maximum
number of NAT sessions the VMG can support.
Interface Status
Interface
This column displays each interface the VMG has.
Status
This field indicates the interface’s use status.
For the LAN and Ethernet WAN interfaces, this field displays
Up
when using the interface
and
NoLink
when not using the interface.
For a WLAN interface, this field displays the enabled (
Up
) or disabled (
Disable
) state of
the interface.
For the DSL interface, this field displays
Down
(line down),
Up
(line up or connected)
,
Drop
(dropping a call) if you're using PPPoE encapsulation, and
NoLink
when not using
the interface.
For the 3G interface, this field displays
Up
when using the interface and
NoDevice
when
no device is detected in any USB slot.
Rate
For the Ethernet WAN and LAN interface, this displays the port speed and duplex setting.
For the DSL interface, it displays the downstream and upstream transmission rate.
For the WLAN interface, it displays the maximum transmission rate or
N/A
with WLAN
disabled.
For the 3G interface, this field displays
Up
when a 3G device is installed in a USB slot
and
N/A
when no device is detected in any USB slot.
Table 5
Status Screen (continued)
LABEL
DESCRIPTION

Rate

3.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top