Zyxel VMG1312-B10D Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Zyxel

VMG1312-B10D

Page 96 / 331 Scroll up to view Page 91 - 95

Chapter 7 Wireless

VMG1312-B Series User’s Guide

The following table describes the general wireless LAN labels in this screen.

Table 16

Network Setting > Wireless > General

LABEL

DESCRIPTION

Wireless Network Setup

Wireless

You can

Enable

Disable

the wireless LAN in this field.

Band

This shows the wireless band which this radio profile is using.

2.4GHz

is the frequency used

by IEEE 802.11b/g/n wireless clients.

Channel

Use

Auto

to have the Device automatically determine a channel to use.

more.../less

Click

more...

to show more information. Click

less

to hide them.

Bandwidth

Select whether the Device uses a wireless channel width of

20MHz

40MHz

A standard 20MHz channel offers transfer speeds of up to 150Mbps whereas a 40MHz

channel uses two standard channels and offers speeds of up to 300 Mbps.

40MHz (channel bonding or dual channel) bonds two adjacent radio channels to increase

throughput. The wireless clients must also support 40 MHz. It is often better to use the 20

MHz setting in a location where the environment hinders the wireless signal.Select

20MHz

you want to lessen radio interference with other wireless devices in your neighborhood or

the wireless clients do not support channel bonding.

Control

Sideband

This is available for some regions when you select a specific channel and set the Bandwidth

field to

40MHz

. Set whether the control channel (set in the

Channel

field) should be in the

Lower

Upper

range of channel bands.

Passphrase

Type

If you set security for the wireless LAN and have the Device generate a password, the

setting in this field determines how the Device generates the password.

Select

None

to set the Device’s password generation to not be based on a passphrase.

Select

Fixed

to use a 16 character passphrase for generating a password.

Select

Variable

to use a 16 to 63 character passphrase for generating a password.

Passphrase Key

For a fixed type passphrase enter 16 alphanumeric characters (0-9, A-Z, with no spaces). It

must contain both letters and numbers and is case-sensitive.

For a variable type passphrase enter 16 to 63 alphanumeric characters (0-9, A-Z, with no

spaces). It must contain both letters and numbers and is case-sensitive.

Wireless Network Settings

Wireless

Network Name

(SSID)

The SSID (Service Set IDentity) identifies the service set with which a wireless device is

associated. Wireless devices associating to the access point (AP) must have the same SSID.

Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.

Max clients

Specify the maximum number of clients that can connect to this network at the same time.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station cannot

obtain the SSID through scanning using a site survey tool.

Enhanced

Multicast

Forwarding

Select this check box to allow the Device to convert wireless multicast traffic into wireless

unicast traffic.

Max. Upstream

Bandwidth

Specify the maximum rate for upstream wireless traffic to the WAN from this WLAN in

kilobits per second (Kbps).

Max.

Downstream

Bandwidth

Specify the maximum rate for downstream wireless traffic to this WLAN from the WAN in

kilobits per second (Kbps).

BSSID

This shows the MAC address of the wireless interface on the Device when wireless LAN is

enabled.

Security Level

Page 97 / 331

Chapter 7 Wireless

VMG1312-B Series User’s Guide

7.2.1

No Security

Select

No Security

to allow wireless stations to communicate with the access points without any

data encryption or authentication.

Note: If you do not enable any wireless security on your Device, your network is

accessible to any wireless networking device that is within range.

Figure 32

Wireless > General: No Security

The following table describes the labels in this screen.

7.2.2

Basic (WEP Encryption)

WEP encryption scrambles the data transmitted between the wireless stations and the access points

(AP) to keep network communications private. Both the wireless stations and the access points

must use the same WEP key.

Note: WEP is extremely insecure. Its encryption can be broken by an attacker, using

widely-available software. It is strongly recommended that you use a more

effective security mechanism. Use the strongest security mechanism that all the

wireless devices in your network support. For example, use WPA-PSK or WPA2-PSK

if all your wireless devices support it, or use WPA or WPA2 if your wireless devices

support it and you have a RADIUS server. If your wireless devices support nothing

stronger than WEP, use the highest encryption level available.

Your Device allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be

enabled at any one time.

Security Mode

Select

Basic (WEP, 802.1X)

More Secure (WPA(2)-PSK)

to add security on this

wireless network. The wireless clients which want to associate to this network must have

same wireless security settings as the Device. When you select to use a security, additional

options appears in this screen.

Or you can select

No Security

to allow any client to associate this network without any data

encryption or authentication.

See the following sections for more details about this field.

Apply

Click

Apply

to save your changes.

Cancel

Click

Cancel

to restore your previously saved settings.

Table 16

Network Setting > Wireless > General (continued)

LABEL

DESCRIPTION

Table 17

Wireless > General: No Security

LABEL

DESCRIPTION

Security Level

Choose

No Security

to allow all wireless connections without data encryption or

authentication.

Page 98 / 331

Chapter 7 Wireless

VMG1312-B Series User’s Guide

In order to configure and enable WEP encryption, click

Network

Setting

Wireless

to display the

General

screen, then select

Basic

as the security level.

Figure 33

Wireless > General: Basic (WEP)

The following table describes the labels in this screen.

7.2.3

More Secure (WPA(2)-PSK)

The WPA-PSK security mode provides both improved data encryption and user authentication over

WEP. Using a Pre-Shared Key (PSK), both the Device and the connecting client share a common

password in order to validate the connection. This type of encryption, while robust, is not as strong

as WPA, WPA2 or even WPA2-PSK. The WPA2-PSK security mode is a newer, more robust version of

the WPA encryption standard. It offers slightly better security, although the use of PSK makes it

less robust than it could be.

Click

Network Setting

Wireless

to display the

General

screen. Select

More Secure

as the

security level. Then select

WPA-PSK

WPA2-PSK

from the

Security Mode

list.

Table 18

Wireless > General: Basic (WEP)

LABEL

DESCRIPTION

Security Level

Select

Basic

to enable WEP data encryption.

Generate

password

automatically

Select this option to have the Device automatically generate a password. The password field

will not be configurable when you select this option.

Password 1~4

The password (WEP keys) are used to encrypt data. Both the Device and the wireless

stations must use the same password (WEP key) for data transmission.

If you chose

64-bit

WEP, then enter any 5 ASCII characters or 10 hexadecimal characters

("0-9", "A-F").

If you chose

128-bit

WEP, then enter 13 ASCII characters or 26 hexadecimal characters

("0-9", "A-F").

You must configure at least one password, only one password can be activated at any one

time.

more.../less

Click

more...

to show more fields in this section. Click

less

to hide them.

WEP Encryption

Select

64-bits

128-bits

This dictates the length of the security key that the network is going to use.

Page 99 / 331

Chapter 7 Wireless

VMG1312-B Series User’s Guide

Figure 34

Wireless > General: More Secure: WPA(2)-PSK

The following table describes the labels in this screen.

7.3

The Guest / More AP Screen

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the Device.

Click

Network Setting > Wireless

> Guest /

More AP

. The following screen displays.

Table 19

Wireless > General: More Secure: WPA(2)-PSK

LABEL

DESCRIPTION

Security Level

Select

More Secure

to enable WPA(2)-PSK data encryption.

Security Mode

Select

WPA-PSK

WPA2-PSK

from the drop-down list box.

Generate

password

automatically

Select this option to have the Device automatically generate a password. The password field

will not be configurable when you select this option.

Password

The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The only

difference between the two is that WPA(2)-PSK uses a simple common password, instead of

user-specific credentials.

If you did not select

Generate password automatically

, you can manually type a pre-

shared key from 8 to 64 case-sensitive keyboard characters.

more.../less

Click

more...

to show more fields in this section. Click

less

to hide them.

WPA-PSK

Compatible

This field appears when you choose

WPA-PSK2

as the

Security Mode

Check this field to allow wireless devices using

WPA-PSK

security mode to connect to your

Device. The Device supports WPA-PSK and WPA2-PSK simultaneously.

Encryption

Select the encryption type (

TKIP

AES

TKIP+AES

) for data encryption.

Select

TKIP

if your wireless clients can all use TKIP.

Select

AES

if your wireless clients can all use AES.

Select

TKIP+AES

to allow the wireless clients to use either TKIP or AES.

Group Key

Update Timer

The

Group Key Update Timer

is the rate at which the RADIUS

server sends a new group

key out to all clients.

Page 100 / 331

Chapter 7 Wireless

VMG1312-B Series User’s Guide

100

Figure 35

Network Setting > Wireless > Guest / More AP

The following table describes the labels in this screen.

7.3.1

Edit Guest / More AP

Use this screen to edit an SSID profile. Click the

Edit

icon next to an SSID in the

Guest / More AP

screen. The following screen displays.

Table 20

Network Setting > Wireless > Guest / More AP

LABEL

DESCRIPTION

This is the index number of the entry.

Status

This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is active.

A gray bulb signifies that this SSID is not active.

SSID

An SSID profile is the set of parameters relating to one of the Device’s BSSs. The SSID

(Service Set IDentifier) identifies the Service Set with which a wireless device is associated.

This field displays the name of the wireless profile on the network. When a wireless client

scans for an AP to associate with, this is the name that is broadcast and seen in the wireless

client utility.

Security

This field indicates the security mode of the SSID profile.

Guest WLAN

This displays if the guest WLAN function has been enabled for this WLAN.

Home Guest

displays, clients can connect to each other directly.

External Guest

displays, clients are blocked from connecting to each other directly.

N/A

displays if guest WLAN is disabled.

Modify

Click the

Edit

icon to configure the SSID profile.

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share