Zyxel VMG1312-B10D Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Zyxel

VMG1312-B10D

Page 76 / 331 Scroll up to view Page 71 - 75

Chapter 6 Broadband

VMG1312-B Series User’s Guide

Tunnel (This is available only when you select

IPv4 Only

IPv6 Only

in the

IPv6/IPv4 Mode

field.)

The DS-Lite (Dual Stack Lite) fields display when you set the

IPv6/IPv4 Mode

field to

IPv6 Only

Enable Dual Stack Lite to let local computers use IPv4 through an ISP’s IPv6 network. See

Dual Stack Lite on

page 69

for more information.

The 6RD (IPv6 rapid deployment) fields display when you set the

IPv6/IPv4 Mode

field to

IPv4 Only

. See

IPv6 Rapid Deployment on page 69

for more information.

Enable DS-Lite

This is available only when you select

IPv6 Only

in the

IPv6/IPv4 Mode

field. Select

Enable

to let local computers use IPv4 through an ISP’s IPv6 network.

DS-Lite Relay

Server IP

Specify the transition router’s IPv6 address.

Enable 6RD

This is available only when you select

IPv4 Only

in the

IPv6/IPv4 Mode

field. Select

Enable

to tunnel IPv6 traffic from the local network through the ISP’s IPv4 network.

6RD Type

Select

Static

if you have the IPv4 address of the relay server, otherwise select

DHCP

have the Device detect it automatically through DHCP.

IPv4 Mask

Length

Enter the subnet mask number (1~32) for the IPv4 network.

6RD Border

Relay Server IP

When you set the

6RD Type

Static

, specify the relay server’s IPv4 address in this field.

6RD IPv6 Prefix

Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP’s border relay router and connecting

to the native IPv6 Internet.

IPv6 Address (This is available only when you select

IPv6/IPv4 DualStack

IPv6 Only

in the

IPv6/IPv4

Mode

field.)

IPv6 Address

Select

Automatic

if you want to have the Device use the IPv6 prefix from the connected

router’s Router Advertisement (RA) to generate an IPv6 address.

•

Select

Get IPv6 Address From DHCPv6 Server(IA_NA)

if you want to obtain an IPv6

address from a DHCPv6 server. The IP address assigned by a DHCPv6 server has priority

over the IP address automatically generated by the Device using the IPv6 prefix from an

RA. This option is available only when you choose to get your IPv6 address

automatically.

•

Select

Prefix Delegation(IA_PD)

to use DHCP PD (Prefix Delegation) which enables

the Device to pass the IPv6 prefix information to its LAN hosts. The hosts can then use

the prefix to generate their IPv6 addresses.

Select

Static

if you have a fixed IPv6 address assigned by your ISP.

Select

None

to not assign any IPv6 address to this WAN connection.

Prefix

Length

Enter the address prefix length to specify how many most significant bits in an IPv6 address

compose the network address.

Next Hop

Enter the IP address of the next-hop gateway. The gateway is a router or switch on the

same segment as your Device's interface(s). The gateway helps forward packets to their

destinations.

IPv6 Routing Feature (This is available only when you select

IPv6/IPv4 DualStack

IPv6 Only

in the

IPv6/IPv4 Mode

field. You can enable IPv6 routing features in the following section.)

MLD Proxy

Enable

Select this checkbox to have the Device act as an MLD proxy on this connection. This allows

the Device to get subscription information and maintain a joined member list for each

multicast group. It can reduce multicast traffic significantly.

Apply as

Default

Gateway

Select this option to have the Device use the WAN interface of this connection as the system

default gateway.

IPv6 DNS

Server

Configure the IPv6 DNS server in the following section.

Table 8

Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode) (continued)

LABEL

DESCRIPTION

Page 77 / 331

Chapter 6 Broadband

VMG1312-B Series User’s Guide

6.2.1.2

Bridge Mode

Click the

Add new WAN Interface

in the

Network Setting > Broadband

screen or the

Edit

icon

next to the connection you want to configure. Select

Bridge

as the encapsulation mode. The screen

varies depending on the interface type you select.

If you select

ADSL/VDSL over PTM

as the interface type, the following screen appears.

IPv6 DNS

Select

Dynamic

to have the Device get the IPv6 DNS server addresses from the ISP

automatically.

Select

Static

to have the Device use the IPv6 DNS server addresses you configure

manually.

IPv6 DNS

Server 1

Enter the first IPv6 DNS server address assigned by the ISP.

IPv6 DNS

Server 2

Enter the second IPv6 DNS server address assigned by the ISP.

VLAN (These fields appear when the

Type

is set to

ADSL/VDSL over PTM

Active

Select this to enable VLAN on this WAN interface.

802.1p

IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame

that contains bits to define class of service.

Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection.

The greater the number, the higher the priority level.

802.1q

Type the VLAN ID number (from 1 to 4094) for traffic through this connection.

QoS

Rate Limit

Enter the rate limit for the connection. This is the maximum transmission rate allowed for

traffic on this connection.

WAN Outgoing

Default Tag

Select

Enable

and enter a

DSCP

(DiffServ Code Point) value to have the Device add it in the

packets sent by this WAN interface.

802.1p

This field displays if you activate VLAN for this WAN interface. Enter a priority level (from 0

to 7) to have the Device add it to traffic through this connection.

DSCP

If you enable Select

WAN Outgoing Default Tag

, enter a

DSCP

(DiffServ Code Point)

value to have the Device add it in the packets sent by this WAN interface.

MTU

MTU Size

Enter the MTU (Maximum Transfer Unit) size for this traffic.

Bridging and

Routing in the

same WAN

Use this feature to bridge a LAN port(s) with the WAN interface. Traffic to/from LAN ports

not in the bridge is routed from the WAN interface.

ADSL use same VPI/VCI in Bridge and Route modes.

VDSL use same VLAN in Bridge and Route modes.

Enable Con-

current WAN

Enable this if you want to use the same VPI/VCI settings in different WAN interfaces. Select

this and then choose the ports to bridge with the WAN interface. \

•

ADSL concurrent WAN uses the same VCI/PVI in both routing and bridge modes.

•

VDSL concurrent WAN uses same VLAN in both routing and bridge mode.

Apply

Click

Apply

to save your changes back to the Device.

Cancel

Click

Cancel

to exit this screen without saving.

Table 8

Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode) (continued)

LABEL

DESCRIPTION

Page 78 / 331

Chapter 6 Broadband

VMG1312-B Series User’s Guide

Figure 23

Network Setting > Broadband > Add New WAN Interface/Edit (Bridge Mode)

The following table describes the fields in this screen.

Table 9

Network Setting > Broadband > Add New WAN Interface/Edit (Bridge Mode)

LABEL

DESCRIPTION

General

Active

Select this to enable the interface.

Name

Enter a service name of the connection.

Type

Select

ADSL/VDSL over PTM

as the interface that you want to configure. The Device uses

the VDSL technology for data transmission over the DSL port.

Mode

Select

Bridge

when your ISP provides you more than one IP address and you want the

connected computers to get individual IP address from ISP’s DHCP server directly. If you

select

Bridge

, you cannot use routing functions, such as QoS, Firewall, DHCP server and

NAT on traffic from the selected LAN port(s).

VLAN

This section is available only when you select

ADSL/VDSL over PTM

in the

Type

field.

Active

Select this to enable VLAN on this WAN interface.

802.1p

IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame

that contains bits to define class of service.

Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection.

The greater the number, the higher the priority level.

802.1q

Type the VLAN ID number (from 0 to 4094) for traffic through this connection.

QoS

Rate Limit

Enter the rate limit for the connection. This is the maximum transmission rate allowed for

traffic on this connection.

Apply

Click

Apply

to save your changes.

Cancel

Click

Cancel

to exit this screen without saving.

Page 79 / 331

Chapter 6 Broadband

VMG1312-B Series User’s Guide

6.3

The 3G Backup Screen

The USB ports (at the left side panel of the Device) allow you to attach a 3G dongle to wirelessly

connect to a 3G network for Internet access. You can have the Device use the 3G WAN connection

as a backup. Disconnect the DSL and Ethernet WAN ports to use the 3G dongle as your primary

WAN connection. The Device automatically uses a wired WAN connection when available.

Note: This Device supports connecting one 3G dongle at a time.

Figure 24

Internet Access Application: 3G WAN

Use this screen to configure your 3G settings. Click

Network Setting > Broadband > 3G

Backup

Page 80 / 331

Chapter 6 Broadband

VMG1312-B Series User’s Guide

Note: The actual data rate you obtain varies depending the 3G card you use, the signal

strength to the service provider’s base station, and so on.

Figure 25

Network Setting

Broadband > 3G Backup

The following table describes the labels in this screen.

Table 10

Network Setting

Broadband > 3G Backup

LABEL

DESCRIPTION

General

3G Backup

Select

Enable

to have the Device use the 3G connection as your WAN or a backup when the

wired WAN connection fails.

Ping Check

Select

Enable

if you want the Device to ping check the connection status of your WAN. You

can configure the frequency of the ping check and number of consecutive failures before

triggering 3G backup.

Check Cycle

Enter the frequency of the ping check in this field.

Consecutive

PING Fail

Enter how many consecutive failures are required before 3G backup is triggered.

Ping Default

Gateway

Select this to have the Device ping the WAN interface’s default gateway IP address.

Ping the Host

Select this to have the Device ping the particular host name or IP address you typed in this

field.

3G Connection Settings

Card

description

This field displays the manufacturer and model name of your 3G card if you inserted one in

the Device. Otherwise, it displays

N/A

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share