Page 36 / 162 Scroll up to view Page 31 - 35
27
5.4
DHCP SERVER SETUP
The ZyXEL VFG6005 Series VPN Firewall Gateway provides DHCP server service in order to offer IP addresses to the
computers within a LAN.
1.
Click on [Setup]
[DHCP Server] tab. You will see the following screen.
2.
Configure your LAN following the instructions listed below.
DHCP Service
Select Enable/Disable to enable/disable DHCP Server.
DHCP Starting IP
Address
The DHCP starting IP addresses offered by the DHCP Server.
Max DHCP Clients
The maximum number of the IP addresses supported by the DHCP server
Lease
Please choose lease time from the selection list. You can choose 1 Hour, 3
Hours, 6 Hours, 1 Day, 3 Days, or 7 Days.
Domain
Please enter the domain name.
DHCP DNS Server
Type
Select OpenDNS Server if you have an OpenDNS account for content filtering.
Otherwise choose ISP DNS Server to use your ISP‘s default server or Custom to
enter your own IP address.
DHCP DNS Server
IP Address
Enter Custom IP address for DNS here.
Page 37 / 162
28
5.5
DDNS SETUP
DDNS (Dynamic Domain Name Service) allows an ―internet domain name‖ to be assigned to a computer/router which has
a dynamic IP address. This makes it possible for other internet devices to connect to the computer/router without needing
to trace the changing IP addresses themselves. To enable DDNS, you will first need to sign up for DDNS services from
DynDNS.org, TZO.com or ZoneEdit.com.
DDNS is useful when combined with the virtual server feature. It allows other internet users to connect to your virtual
server by using a domain name, rather than an IP address. The DDNS service helps users to locate the right IP address by
the domain name.
For example, you wish to set up a personal web server. However, you obtain a different IP address from your ISP every
time you connect to the internet. The dynamic IP address you have will cause difficulty for other internet users to find your
web server. In this case, you will need to enable DDNS, so other users can connect to you through a fixed domain name to
disregard the potential varying IP addresses behind the server.
1.
Register with one of the DDNS providers (DynDNS.org, TZO.com or ZoneEdit.com) before you configure DDNS
on the ZyXEL VFG6005 Series VPN Firewall Gateway.
2.
Click on [Setup]
[DDNS] tab.
You will see the following screen.
Page 38 / 162
29
3.
Configure your DDNS following the instructions listed below.
DDNS Service
Select Enable to enable DDNS service.
Select Disable to disable DDNS service.
DDNS Type
Select the desired DDNS service provider from the list.
User Name
Enter your username
Password
Enter your password
Host Name
Apply for a domain name, and make sure it is allocated to you
Action
Press Update button to immediately update DDNS information.
Page 39 / 162
30
CHAPTER6 WIRELESS SETTINGS
6.1
BASIC SETUP
Multiple SSIDs allow the ability for separate security mode and key settings to be set by users for both convenience and
increased protection. Users are able to configure their network devices to access the first SSID with the WPA2 PSK
(Pre-Shared Key) and secret key, whilst share the second SSID with WEP and the periodically changed key for visitors. In
addition, users are able to isolate these SSIDs to avoid malicious attacks and prevent certain access for visitors using the
second SSID. This then provides users an extremely convenient approach to share the wireless access, provide access
internet access for visitors, while possessing a strong security protection system at all times.
6.1.1
Settings
1.
Click on [Wireless]
[Basic] tab. You will see the following screen.
2.
Configure wireless settings following the instructions below.
Wireless
Connection
Select Enable if you would like to turn on the wireless signal
Select Disable if you would like to turn off the wireless signal.
Wireless Mode
Select the wireless mode for 802.11b/g/n or mixed use.
Transmission
Power
Select the transmission power class from 10%, 25%, 50%, 75%, and 100%.
Wireless Channel
Select which channel to be located to.
Wireless Isolation
Between SSIDs
Select Enable if you would like to block traffic from one SSID to another.
Select Disable if you would like to allow traffic from one SSID to another.
Page 40 / 162
31
6.1.2
SSID Settings
Users are able to configure each SSID with its own attributes. Further, various security modes are available based on the
user‘s needs and preference: Disable, WEP, WPA Pre
-Shared Key, WPA, WPA2 Pre-Shared Key, and WPA2. However, it
is important to note that all devices under the wireless network must use the same security mode.
You can configure the security settings of your wireless network to suit your desired preference. Different methods will
grant different levels of security. Using encryption - data packet is encrypted before transmission - can prevent data
packets from being intruded on by un-trusted parties. However, please note that the higher the security level is, the lower
the data throughput becomes.
1.
Click on [Wireless]
[Basic] tab. You will see the following screen.
2.
Configure SSID settings following the instructions below.
Wireless SSID
Select Enable if you would like to turn on this SSID.
Select Disable if you would like to turn off this SSID.
Wireless SSID
Name
Enter the wireless station name you would like to have.
Wireless SSID
Broadcasting
The ZyXEL VFG6005 Series VPN Firewall Gateway broadcasts SSID periodically. Select
Enable to turn it on or Disable to turn it off.
Enabling SSID Broadcasting brings convenience for users to find and connect The ZyXEL
VFG6005 Series VPN Firewall Gateway.
Disabling SSID broadcasting enhances the security by hiding SSID information.
Wi-Fi Multimedia
(WMM)
Select Enable to prioritize different traffic types based on their characteristics.
For example, VoIP or video traffic will have higher priorities over ordinary traffic.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top