Page 36 / 382
Scroll up to view Page 31 - 35
Chapter 2 Tutorials
P-870HN-51b User’s Guide
36
7
Verify the profile settings in the read-only screen. Click
Save
to save and go to the
next screen.
Figure 16
Profile: Confirm Save
8
Click
Activate Now
to use the new profile immediately. Otherwise, click the
Activate Later
button.
If you clicked
Activate Later
, you can select the profile from the list in the
Profile
screen and click
Connect
to activate it.
Note: Only one profile can be activated and used at any given time.
Figure 17
Profile: Activate
9
When you activate the new profile, the ZyXEL utility returns to the
Link Info
screen while it connects to the AP using your settings. When the wireless link is
established, the ZyXEL utility icon in the system tray turns green and the
Link
Info
screen displays details of the active connection.
10
Open your Internet browser, enter
or the URL of any other
web site in the address bar and press ENTER. If you are able to access the web
site, your new profile is successfully configured.
11
If you cannot access the Internet go back to the
Profile
screen, select the profile
you are using and click
Edit
. Check the details you entered previously. Also, refer
to the Troubleshooting section of this User's Guide or contact your network
administrator if necessary.
Page 37 / 382
Chapter 2 Tutorials
P-870HN-51b User’s Guide
37
2.2
How to Set up Multiple VDSL Connection
Groups
This tutorial shows you how to set up two VDSL WAN connections for two LAN
groups. GR1 will use VDSL connection 1. GR2 will use VDSL connection 2. There is
also a third default group that has no WAN connection associated to it.
Multiple VDSL Connection Groups
2.2.1
Adding WAN Internet Connections
In this example, we will add 2 new WAN connections: PTM/Bridge and PTM/PPPoE.
2.2.1.1
Adding a PTM/Bridge WAN Service
1
Click
Network > WAN > Internet Connection
and click
Add
.
Table 2
VDSL Connection Groups
GROUP
LAN
WAN
Default
LAN2
N/A
GR1
LAN1, WLAN
VDSL1: ptm0_1(PTM/Bridge)
GR2
LAN3, LAN4
VDSL2: ptm0_2(PTM/PPPoE)
Default: LAN2
Internet
192.168.1.x
192.168.2.x
ptm0_2(PTM/PPPoE)
GR1: LAN1, WLAN
192.168.3.x
GR2: LAN3, 4
ptm0_1(PTM/Bridge)
VDSL1
VDSL2
Page 38 / 382
Chapter 2 Tutorials
P-870HN-51b User’s Guide
38
2
Select
PTM0/(0_0_1)
as the layer 2 interface for this service and click
Next
.
3
Select
Bridging
as the WAN service type and clear the
Tag VLAN ID for egress
packets
option. Click
Next
to finish the setup.
Page 39 / 382
Chapter 2 Tutorials
P-870HN-51b User’s Guide
39
4
The WAN setup summary is displayed. If the settings are correct, click
Apply/
Save
.
5
The PTM/Bridge WAN connection is configured successfully. The Internet
Connection screen should look like the following.
2.2.1.2
Adding a PTM/PPPoE WAN Service
1
Click
Network > WAN > Internet Connection
and click
Add
.
2
Select
PTM0/(0_0_1)
as the layer 2 interface for this service and click
Next
.
Page 40 / 382
Chapter 2 Tutorials
P-870HN-51b User’s Guide
40
3
Select
PPP over Ethernet
as the WAN service type and clear the
Tag VLAN ID
for egress packets
option. Then click
Next
.
4
Configure the
PPP User and Password
screen. The
PPP Username
is
, the
PPP Password
is
1234
, and the
PPPoE Service Name
is
User
. Click
Next
when you finish the settings.
19216811.live