Page 46 / 382
Scroll up to view Page 41 - 45
Chapter 2 Tutorials
P-870HN-51b User’s Guide
46
4
Enter
GR2
as the
Group Name
. In this group, we will associate PTM/PPPoE as the
WAN interface with LAN3 and LAN4 as the LAN interfaces. Select
pppoe_0_0_1.0/ppp0.3
(VDSL2) from the
WAN Interface
options. Select
LAN3
and
LAN4
from the
Available LAN Interfaces
list and click <- to add
them to the
Grouped LAN Interfaces
. Click
Apply
to finish the settings.
Page 47 / 382
Chapter 2 Tutorials
P-870HN-51b User’s Guide
47
5
GR2 has been added successfully to the interface group list. The screen should
look like the following.
Page 48 / 382
Chapter 2 Tutorials
P-870HN-51b User’s Guide
48
2.2.3
Configuring Interface Group IP
1
Click
Network
>
LAN
>
IP
. Select
GR1
from the GroupName drop-down list. The
IP Address (192.168.2.1) and IP Subnet Mask (255.255.255.0) is obtained
automatically.
Page 49 / 382
Chapter 2 Tutorials
P-870HN-51b User’s Guide
49
2
Select
GR2
from the GroupName drop-down list. The IP Address (192.168.3.1)
and IP Subnet Mask (255.255.255.0) is obtained automatically. Select
Enable
DHCP
and
DHCP Server
to have the ZyXEL Device act as the DHCP server for the
network. Click
Apply
when you finish the settings.
2.2.4
Testing the VDSL Connection Groups
To test if the connection groups are successfully configured, you can do the
following: connect your computer to LAN1 of the Device. After a few seconds, your
computer gets a new IP from the WAN side. If you can access Internet by using
this VDSL connection, GR1 is successfully configured.
To test GR2, connect your computer to LAN3 or LAN4 of the Device. After a few
seconds, the IP address of your computer should be renewed to 192.168.3.x
automatically. If you can access Internet by using this VDSL connection, GR2 is
successfully configured.
19216811.live