1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-660R-T1
    5. /
  5. 2
Page 6 / 15 Scroll up to view Page 1 - 5
5
P-660R-T1/T3 v2 Quick Start Guide
C: Web Configurator Internet Access Wizard
"
Enter the Internet access information given to
you by your ISP exactly in each wizard screen. If
not given, leave the fields set to the default.
1
In your browser, go to
2
Enter the administrator password
1234
.
V
If your browser cannot find this screen, see the
Troubleshooting
section.
Page 7 / 15
P-660R-T1/T3 v2 Quick Start Guide
6
3
It is strongly recommended that you change the default
password in the next screen. If you change it, you will not
see this screen the next time you log in.
4
Select
Go to Wizard setup
and click
Apply
. You will need
information supplied by your Internet service provider
(ISP).
Page 8 / 15
7
P-660R-T1/T3 v2 Quick Start Guide
5
Follow the directions in each wizard screen. Enter the
Internet access information exactly supplied by your ISP. If
not given, leave the fields at the default setting.
6
When you are finished exit the wizard and browse out to
any website (for example www.zyxel.com) to test your
connection.
V
See the Troubleshooting section if you cannot
access the Internet.
D: View the Status Screen
You can view the status screen of the P-660R-T1/T3 v2 by
logging into the web configurator with the default user
account.
1
In your browser, go to
2
Enter the default password
user
.
Page 9 / 15
P-660R-T1/T3 v2 Quick Start Guide
8
V
If your browser cannot find this screen, see the
Troubleshooting
section.
3
The status screen displays your Internet access
information. See the User’s Guide for full description of
this screen.
Troubleshooting
1
If you cannot access the web configurator using Internet
Explorer in Windows XP or Windows Server 2003, take
the following steps.
A)
Check the cable connection from your computer to the
P-660R-T1/T3 v2.
Page 10 / 15
9
P-660R-T1/T3 v2 Quick Start Guide
B)
Make sure you enter the password correctly (the field is
case sensitive). If you have forgotten the P-660R-T1/T3
v2’s password, use the
RESET
button. Press the button
in for about 10 seconds (or until the
POWER
light starts
to blink), then release it. It returns the P-660R-T1/T3 v2
to the factory defaults (IP address 192.168.1.1,
password 1234).
C)
Make sure your computer’s IP address is in the same
subnet as the P-660R-T1/T3 v2’s LAN IP address (see
Set Up Your Computer’s IP Address
section).
D)
Ping the P-660R-T1/T3 v2 from a computer on the LAN.
Make sure your computer’s Ethernet adapter is installed
and functioning properly. In the computer, click
Start
,
(
All) Programs
,
Accessories
and then
Command
Prompt
. In the
Command Prompt
window, type "ping"
followed by the P-660R-T1/T3 v2’s LAN IP address
(192.168.1.1 is the default) and then press
[ENTER]
on
your keyboard. The P-660R-T1/T3 v2 should reply; if it
does not, see
Set Up Your Computer’s IP Address
section.
E)
If the P-660R-T1/T3 v2’s IP address has changed, enter
the new one as the URL. If you have forgotten the new
IP address, use the
RESET
button (see step
B
).
F)
Make sure you allow pop-up windows, JavaScripts and
Java permissions or set the Internet security level lower
than
High
in Internet Explorer (in Internet Explorer, click
Tools > Internet Options > Security > Custom Level...
).
See the appendix in the User’s Guide for more
information.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top