Zyxel P-660R-T1 Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Zyxel P-660R-T1 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 15
P-660R-T1/T3 v2
ADSL2+ Access Router
Quick Start Guide
Version 3.40
Edition 1
12/2006
Page 2 / 15
1
P-660R-T1/T3 v2 Quick Start Guide
Overview
This Quick Start Guide shows you how to:
1 Connect the Hardware
1 ETHERNET
:
Use an Ethernet cable to connect a computer
to the
ETHERNET
port for Internet access.
2 DSL
: Use a telephone wire to connect your P-660R-T1/T3
v2’s
DSL
port to a telephone jack (or to a splitter, if one is
already installed).
3 POWER
: Use only the included power adaptor to connect
the
POWER
socket to an appropriate power source.
1 Connect the Hardware
2 Set Up Internet Access
1
2
3
Page 3 / 15
P-660R-T1/T3 v2 Quick Start Guide
2
After you’ve made the connections, push in the power button
to turn on the P-660R-T1/T3 v2. Look at the LEDs.
• The
POWER
LED blinks while performing system testing. It
then turns steady on if the testing is successful.
• The
DSL
LED blinks then turns steady on, and blinks when
there is traffic.
• The
ETHERNET
LED turns on if the
ETHERNET
port is
properly connected, and blinks when there is traffic.
V
If none of the LEDs are on, unplug the device
and recheck your hardware connections.
2 Set Up Internet Access
You can configure the P-660R-T1/T3 v2 for Internet access in
any one of these ways:
A: Configuration Genie
.
B: Zero Configuration
.
C: Web Configurator Internet Access Wizard
.
Page 4 / 15
3
P-660R-T1/T3 v2 Quick Start Guide
You can also view the connection status, see:
D: View the Status Screen
"
Configuration Genie and Zero configuration are
only able to configure the device automatically
for Internet access if you are using
PPPoE
,
PPPoA
or
ENET
ENCAP
encapsulation with a
dynamically-assigned IP address from your ISP.
If you are not using these Internet access settings, then use
the
Web Configurator Internet Access Wizard
to manually
configure the device.
You will need your Internet access information such as user
name and password, if provided by your ISP.
A: Configuration Genie
From the included CD, click
Setup, Multimedia Auto
Provisioner
(the installation and configuration assistant) and
then click
Installation Tutorial
. After you have viewed the
tutorial, click
Configuration Genie
at the end of the installation
tutorial or from
Multimedia Auto Provisioner
on the CD.
Page 5 / 15
P-660R-T1/T3 v2 Quick Start Guide
4
B: Zero Configuration
Launch your web browser and navigate to any web site (for
example,
www.zyxel.com
). The P-660R-T1/T3 v2
automatically detects and configures your Internet
connection. This may take about two minutes.
If you have a
PPPoE
or
PPPoA
connection, a screen displays
prompting you to enter your Internet account information.
Enter the username, password and/or system password
19216811.live