P-660HW-Dx v2 Quick Start Guide

11

•

Click the wizard icon (

). Run the

Internet/Wireless Setup

wizard again. Check whether you can

access the Internet.

If you still cannot access the Internet, take the following steps:

•

If you are using

Bridge

mode (check

Mode

in the

Network

>

WAN

>

Internet Connection

screen) click

NAT

>

General

and ensure

Active Network Address Translation (NAT

) is not selected. Click

LAN

>

DHCP Setup

and ensure that

DHCP

is set to

None

. Your ISP gives your computer an IP address

directly. If you want to access the P-660HW-Dx v2 again, you need to use a static IP address in the

same subnet as your P-660HW-Dx v2 (the P-660HW-Dx v2’s default IP address is http://192.168.1.1).

•

Click the wizard icon (

). Run the

Internet/Wireless Setup

wizard again. Check whether you can

access the Internet.

If you still cannot access the Internet, contact your Internet Service Provider.

3

If you cannot access the Internet using the wireless network, follow these steps.

A)

On a computer in the wireless network, open your browser, and go to

. If you see the

login screen in section

3

, follow suggestions

A

-

F

above. If you do not, go to the next step.

B)

On a computer connected to the P-660HW-Dx v2, make sure your P-660HW-Dx v2 and the computers

on your wireless network are using the same wireless and wireless security settings. See the chapter on

Wireless LAN in the User’s Guide for more information.

Viewing Your Product’s Certifications

1

Go to

www.zyxel.com

.

2

Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3

Select the certification you wish to view from this page.