P-660HN-51

11

3.

Press the

WPS

button on the P-660HN-51’s front panel for 5 to 10

seconds to turn the WPS function on. The

WPS/WLAN

LED light

starts blinking orange.

4.

Follow these steps to add a WPS-enabled device to the wireless

network using the

WPS/WLAN

button.

Place the device you want to connect near

one another.

Press the

WPS/WLAN

button on the P-

660HN-51.

The

WPS

light blinks.

Press the WPS button on a compatible

device within 2 minutes of pressing the

button on the P-660HN-51.

The

WPS

light on the P-660HN-51 shines

steadily when connected.

1

1

2

3

Viewing a Product’s Certifications

1.

Go to www.zyxel.com.

2.

Select your product from the drop-down list box on the ZyXEL

home page to go to that product's page.

3.

Select the certification you wish to view from this page.

12

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

For a Class B digital device or peripheral, the instructions furnished the user shall include

the following or similar statement, placed in a prominent location in the text of the

manual:

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

RF exposure warning

This equipment must be installed and operated in accordance with provided instructions

and the antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 20 cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmitter. End-users and installers must be

provide with antenna installation instructions and transmitter operating conditions for

satisfying RF exposure compliance.