Page 6 / 12
Scroll up to view Page 1 - 5
6
Log into the Web Configurator
Your device may already be set up for Internet access. However, you
may want or need to log on to the P-660HN-51 web configurator to
perform tasks:
•
Configure your Internet access settings manually
•
Customize the Quality of Service (QoS) and routing features
•
Enable firewall and create filter rules
•
Edit remote management, as well as other features
1.
In your browser, go to
.
2.
Enter the default user name
admin
and password
1234.
Click
Login
.
If the login screen does not open, make sure you allow web
browser pop-up windows, JavaScript and Java permissions.
Your computer should be also set to get an IP address
automatically from a DHCP server. See your User’s Guide
for more information.
Page 7 / 12
P-660HN-51
7
3.
A welcome screen appears showing a summary of your last login.
Select
Show this page next time
to see the welcome screen on your
next login. Otherwise, deselect it. Click
Continue
.
4.
The
Network Map
page appears. This shows whether the P-660HN-
51 and computers/devices connected to it have Internet access.
Page 8 / 12
8
Click on
Status
to display the following screen, where you can view the
P-660HN-51 device, interface and system information.
5.
If the
DSL
light is turned off, manually configure the Internet
connection Click
Network Settings > Broadband
, then click
Add
new WAN Interface
.
•
Select
Active
to activate the WAN configuration and enter the
connection name.
•
Select the Internet mode (
Routing
) and encapsulation (
PPPoE
)
used by your ISP.
•
Type your account username and password.
•
Type your static IP address and DNS server if they are not assigned
automatically to your account. Click
Apply
.
Page 9 / 12
P-660HN-51
9
See the User’s Guide on the CD for all configuration details.
Internet
Account
Page 10 / 12
10
Using Wireless Protected Setup
(WPS)
If your wireless devices display the WPS logo, you
can use Wi-Fi Protected Setup (WPS) to add
wireless devices to your wireless network. If your
wireless devices do not display the WPS logo, go to
Set Up a Wireless Network
on page
5
to manually set up a wireless
network.
You must enable the
WPS
function before using the
WPS
button.
1.
Log into the Web Configurator (see page
5
for more information).
Then click N
etwork Settings > Wireless > WPS
to go to the WPS
screen.
2.
Select
Enable
and click
Apply
.
19216811.live