Page 36 / 141 Scroll up to view Page 31 - 35
ZyXELP-330W User’s Guide
Chapter 3 Wizard Setup
36
3.4.1
No Encryption
Choose
None
to allow the WLAN to operate without encryption.
Warning: With no
encryption enabled anyone will be able to access your network and view any data you send
over the wireless LAN.
3.4.2
WEP Encryption
Choose
WEP
to setup WEP Encryption parameters.
Figure 10
Wizard 4: Wireless LAN Setup: WEP Security
The following table describes the labels in this screen.
Table 9
Wizard 4: Wireless LAN Setup: WEP Security
LABEL
DESCRIPTION
Key Length
Select
64-bit WEP
or
128-bit WEP
data encryption.
Key Format
Select ASCII in order to enter ASCII characters as the WEP keys.
Select Hex to enter hexadecimal characters as the WEP keys.
Default Tx Key
This key refers to which key below will be used as the default key.
Key 1 to Key 4
The WEP keys are used to encrypt data. Both the P-330W and the wireless stations
must use the same WEP key for data transmission.
If you chose
64-bit WEP
, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose
128-bit WEP
, then enter 13 ASCII characters or 26 hexadecimal
characters
("0-9", "A-F").
You must configure at least one key, only one key can be activated at any one time.
The default key is key 1.
Page 37 / 141
ZyXEL P-330W User’s Guide
37
Chapter 3 Wizard Setup
3.4.3
WPA
Choose
WPA
security in the Wireless LAN Setup screen to set up a
Pre-Shared Key
using
TKIP or AES encryption.
Figure 11
Wizard 4: Wireless LAN Setup: WPA Security
The following table describes the labels in this screen.
3.4.4
WPA2 (AES)
Choose
WPA2 (AES)
security in the Wireless LAN Setup screen to set up a
Pre-Shared Key
using AES encryption.
Cancel
Click
Cancel
to abort the setup wizard.
Back
Click
Back
to display the previous screen.
Next
Click
Next
to proceed to the next screen.
Table 9
Wizard 4: Wireless LAN Setup: WEP Security
LABEL
DESCRIPTION
Table 10
Wizard 4: Wireless LAN Setup: WPA Security
LABEL
DESCRIPTION
WPA Format
You can choose to enter the pre-shared key manually in HEX format or use a
passphrase.
Note, many client devices only allow entry via passphrase.
Pre-Shared
Key
For Passphrase: Type from 8 to 63 case-sensitive ASCII characters.
For HEX: Type a 64 character hex key.
Cancel
Click
Cancel
to abort the setup wizard.
Back
Click
Back
to display the previous screen.
Next
Click
Next
to proceed to the next screen.
Page 38 / 141
ZyXELP-330W User’s Guide
Chapter 3 Wizard Setup
38
Figure 12
Wizard 4: Wireless LAN Setup: WPA2 Security
The following table describes the labels in this screen.
3.4.5
WPA2 Mixed
Choose
WPA2 Mixed
security in the Wireless LAN Setup screen to set up a
Pre-Shared Key
using both TKIP and AES encryption.
This allows both WPA and WPA2 clients to connect.
Table 11
Wizard 4: Wireless LAN Setup: WPA2 Security
LABEL
DESCRIPTION
WPA Format
You can choose to enter the pre-shared key manually in HEX format or use a
passphrase.
Note, many client devices only allow entry via passphrase.
Pre-Shared
Key
For Passphrase: Type from 8 to 63 case-sensitive ASCII characters.
For HEX: Type a 64 character hex key.
Cancel
Click
Cancel
to abort the setup wizard.
Back
Click
Back
to display the previous screen.
Next
Click
Next
to proceed to the next screen.
Page 39 / 141
ZyXEL P-330W User’s Guide
39
Chapter 3 Wizard Setup
Figure 13
Wizard 4: Wireless LAN Setup: WPA2 Security
The following table describes the labels in this screen.
3.5
Basic Setup Complete
Click
Finish
to complete the wizard setup and save your configuration.
Well done! You have successfully set up your P-330W to operate on your network and access
the Internet
Table 12
Wizard 4: Wireless LAN Setup: WPA2 Security
LABEL
DESCRIPTION
WPA Format
You can choose to enter the pre-shared key manually in HEX format or use a
passphrase.
Note, many client devices only allow entry via passphrase.
Pre-Shared
Key
For Passphrase: Type from 8 to 63 case-sensitive ASCII characters.
For HEX: Type a 64 character hex key.
Cancel
Click
Cancel
to abort the setup wizard.
Back
Click
Back
to display the previous screen.
Next
Click
Next
to proceed to the next screen.
Page 40 / 141
ZyXEL P-330W User’s Guide
Chapter 4 System Screens
40
C
HAPTER
4
System Screens
This chapter provides information on the options configurable from the main System screens.
Figure 14
System Screen Menu Options
4.1
Setup Wizard
See the
Setup Wizard
chapter for more information on this selection.
4.2
Operation Mode
Click
Operation Mode
to open the
Operation Mode
screen.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top