1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-330W
    5. /
  5. 7
Page 31 / 141 Scroll up to view Page 26 - 30
ZyXEL P-330W User’s Guide
31
Chapter 3 Wizard Setup
Figure 5
Wizard 2: Static IP Encapsulation
The following table describes the labels in this screen.
3.2.3
PPPoE Encapsulation
Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an
IETF (Internet Engineering Task Force) draft standard specifying how a host personal
computer interacts with a broadband modem (for example DSL, cable, wireless, etc.) to
achieve access to high-speed data networks.
For the service provider, PPPoE offers an access and authentication method that works with
existing access control systems (for instance, Radius). For the user, PPPoE provides a login
and authentication method that the existing Microsoft Dial-Up Networking software can
activate, and therefore requires no new learning or procedures for Windows users.
Table 4
Wizard 2: Ethernet Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
IP Address
The fixed IP address should be in the same subnet as your broadband modem or
router.
This should be provided to you by your ISP
Subnet Mask
Enter a
Subnet Mask
appropriate to your network.
Default Gateway
Enter the
Gateway IP Address
of the neighboring device, if you know it. If you do
not, leave the Gateway IP Address field blank.
DNS
DNS (Domain Name System) is for mapping a domain name to its corresponding
IP address and vice versa. The DNS server is extremely important because
without it, you must know the IP address of a computer before you can access it.
Enter your
DNS Server
IP address here.
Cancel
Click
Cancel
to abort the setup wizard.
Back
Click
Back
to return to the previous screen.
Next
Click
Next
to continue.
Page 32 / 141
ZyXELP-330W User’s Guide
Chapter 3 Wizard Setup
32
One of the benefits of PPPoE is the ability to let end users access one of multiple network
services, a function known as dynamic service selection. This enables the service provider to
easily create and offer new IP services for specific users.
Operationally, PPPoE saves significant effort for both the subscriber and the ISP/carrier, as it
requires no specific configuration of the broadband modem at the subscriber’s site.
By implementing PPPoE directly on the P-330W (rather than individual computers), the
computers on the LAN do not need PPPoE software installed, since the P-330W does that part
of the task. Furthermore, with NAT, all of the LAN's computers will have Internet access.
Refer to the appendix for more information on PPPoE.
Figure 6
Wizard 2: PPPoE Encapsulation
The following table describes the labels in this screen.
3.2.4
PPTP Encapsulation
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
PPTP supports on-demand, multi-protocol, and virtual private networking over public
networks, such as the Internet.
Table 5
Wizard 2: PPPoE Encapsulation
LABEL
DESCRIPTION
ISP Parameter for Internet Access
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.
Cancel
Click
Cancel
to abort the setup wizard.
Next
Click
Next
to continue.
Back
Click
Back
to return to the previous screen.
Page 33 / 141
ZyXEL P-330W User’s Guide
33
Chapter 3 Wizard Setup
Refer to the appendix for more information on PPTP.
Figure 7
Wizard 2: PPTP Encapsulation
The following table describes the fields in this screen
3.2.5
L2TP Encapsulation
Layer Two Tunneling Protocol (L2TP) is a network protocol that enables transfers of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
Note:
The P-330W supports one PPTP server connection at
any given time.
Table 6
Wizard 2: PPTP Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
IP Address
Type the (static) IP address assigned to you by your ISP.
IP Subnet Mask
Type the subnet mask assigned to you by your ISP.
Default Gateway
Type the default gateway assigned to you by your ISP.
Server IP Address
Type the IP address of the PPTP server.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the User Name above.
Cancel
Click
Cancel
to abort the setup wizard.
Back
Click
Back
to return to the previous screen.
Next
Click
Next
to continue.
Page 34 / 141
ZyXELP-330W User’s Guide
Chapter 3 Wizard Setup
34
Figure 8
Wizard 2: L2TP Encapsulation
The following table describes the fields in this screen
3.3
Wizard Setup: Screen 3
Set up the basics of your wireless LAN using the third wizard screen.
Table 7
Wizard 2: L2TP Encapsulation
LABEL
DESCRIPTION
Attain IP
Automatically
Select this if your ISP automatically assigns you an IP Address.
Set IP Manually
Select this if your ISP has assigned you a fixed IP address.
IP Address
Type the (static) IP address assigned to you by your ISP.
IP Subnet Mask
Type the subnet mask assigned to you by your ISP.
Default Gateway
Type the default gateway assigned to you by your ISP.
Server IP Address
Type the IP address of the L2TP server.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the User Name above.
Cancel
Click
Cancel
to abort the setup wizard.
Back
Click
Back
to return to the previous screen.
Next
Click
Next
to continue.
Page 35 / 141
ZyXEL P-330W User’s Guide
35
Chapter 3 Wizard Setup
Figure 9
Wizard 3: Wireless LAN Basic Setup
The following table describes the labels in this screen.
3.4
Wizard Setup: Screen 4
There are 5 different versions of this page depending on what method of encryption you want
to enable on your wireless LAN.
Table 8
Wizard 3: Wireless LAN Basic Setup
LABEL
DESCRIPTION
Band
Choose the operating mode of your wireless access point.
2.4Ghz (B+G)
offers the
greatest compatibility.
2.4 GHz (B)
will only allow 802.11b clients to connect to the
wireless LAN.
2.4 GHz (G)
will only allow 802.11g clients to connect to the wireless
LAN.
SSID
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
If you change this field on the P-330W, make sure all wireless stations use the same
SSID in order to access the network.
Channel
Number
To manually set the P-330W to use a channel, select a channel from the drop-down list
box.
Disable
Access Point
Select this check box to disable the wireless LAN capabilities of your P-330W.
Cancel
Click
Cancel
to abort the setup wizard.
Back
Click
Back
to display the previous screen.
Next
Click
Next
to proceed to the next screen.
Note:
The wireless stations and P-330W must use the same
SSID, channel ID and encryption key (if encryption is enabled)
for wireless communication

Rate

3.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top