Page 256 / 285 Scroll up to view Page 251 - 255
Prestige 324 Intelligent Broadband Sharing Gateway
12
Log Descriptions
Appendix E
Log Descriptions
Configure centralized logs using the embedded web configurator; see the online help for details.
This appendix describes some of the log messages.
Chart 1 System Error Logs
LOG MESSAGE
DESCRIPTION
%s exceeds the max.
number of session per
host!
This attempt to create a NAT session exceeds the maximum number of
NAT session table entries allowed to be created per host.
Chart 2 System Maintenance Logs
LOG MESSAGE
DESCRIPTION
Time calibration is
successful
The router has adjusted its time based on information from the time
server.
Time calibration
failed
The router failed to get information from the time server.
DHCP client gets %s
A DHCP client got a new IP address from the DHCP server.
DHCP client IP
expired
A DHCP client's IP address has expired.
DHCP server assigns
%s
The DHCP server assigned an IP address to a client.
SMT Login
Successfully
Someone has logged on to the router's SMT interface.
SMT Login Fail
Someone has failed to log on to the router's SMT interface.
WEB Login
Successfully
Someone has logged on to the router's web configurator interface.
WEB Login Fail
Someone has failed to log on to the router's web configurator interface.
Page 257 / 285
Log Descriptions
13
Chart 2 System Maintenance Logs
TELNET Login
Successfully
Someone has logged on to the router via telnet.
TELNET Login Fail
Someone has failed to log on to the router via telnet.
FTP Login
Successfully
Someone has logged on to the router via ftp.
FTP Login Fail
Someone has failed to log on to the router via ftp.
NAT Session Table is
Full!
The maximum number of NAT session table entries has been
exceeded and the table is full.
!! Phase 1 ID type
mismatch
The ID type of an incoming packet does not match the local's peer ID
type.
!! Phase 1 ID content
mismatch
The ID content of an incoming packet does not match the local's peer
ID content.
!! No known phase 1
ID type found
The ID type of an incoming packet does not match any known ID type.
Chart 3 UPnP Logs
LOG MESSAGE
DESCRIPTION
UPnP pass through Firewall
UPnP packets can pass through the firewall.
Chart 4 Content Filtering Logs
CATEGORY
LOG MESSAGE
DESCRIPTION
URLFOR
IP/Domain Name
The Prestige allows access to this IP address or domain
name and forwarded traffic addressed to the IP address or
domain name.
URLBLK
IP/Domain Name
The Prestige blocked access to this IP address or domain
name due to a forbidden keyword. All web traffic is disabled
except for trusted domains, untrusted domains, or the
cybernot list.
Page 258 / 285
Prestige 324 Intelligent Broadband Sharing Gateway
14
Log Descriptions
Chart 4 Content Filtering Logs
JAVBLK
IP/Domain Name
The Prestige blocked access to this IP address or domain
name because of a forbidden service such as: ActiveX, a
Java applet, a cookie, or a proxy.
Chart 5 ICMP Type and Code Explanations
TYPE
CODE
DESCRIPTION
0
Echo Reply
0
Echo reply message
3
Destination Unreachable
0
Net unreachable
1
Host unreachable
2
Protocol unreachable
3
Port unreachable
4
A packet that needed fragmentation was dropped because it was set to Don't
Fragment (DF)
5
Source route failed
4
Source Quench
0
A gateway may discard internet datagrams if it does not have the buffer space
needed to queue the datagrams for output to the next network on the route to
the destination network.
5
Redirect
0
Redirect datagrams for the Network
1
Redirect datagrams for the Host
2
Redirect datagrams for the Type of Service and Network
3
Redirect datagrams for the Type of Service and Host
8
Echo
0
Echo message
Page 259 / 285
Log Descriptions
15
Chart 5 ICMP Type and Code Explanations
TYPE
CODE
DESCRIPTION
11
Time Exceeded
0
Time to live exceeded in transit
1
Fragment reassembly time exceeded
12
Parameter Problem
0
Pointer indicates the error
13
Timestamp
0
Timestamp request message
14
Timestamp Reply
0
Timestamp reply message
15
Information Request
0
Information request message
16
Information Reply
0
Information reply message
Page 260 / 285
Prestige 324 Intelligent Broadband Sharing Gateway
16
Hardware Specifications
Appendix F
Power Adapter Specifications
North American Plug Standards
AC Power Adapter Model: MW41-0901000A
AC Power Adapter Model: DV-9750-4
Input Power: AC120Volts/60Hz/13W
Input Power: AC120Volts/60Hz/15W
Output Power: AC 9Volts/1.0A
Output Power: AC 9Volts/1.0A
Power Consumption: 10 W
Power Consumption: 10 W
Safety Standards: UL, CUL (UL 1310, CSA C22.2
No.223)
Safety Standards: UL, CUL (UL 1310, CSA C22.2
No.223)
European Plug Standards
AC Power Adapter Model: JAA-091000E
AC Power Adapter Model: DV-91AACUP
Input Power: AC230Volts/50Hz/65mA
Input Power: AC230Volts/50Hz/85mA
Output Power: AC 9Volts/1.0A
Output Power: AC 9Volts/1.0A
Power Consumption: 10 W
Power Consumption: 10 W
Safety Standards: TUV, CE (EN 60950)
Safety Standards: TUV, CE (EN 60950)
United Kingdom Plug Standards
Australia and New Zealand Plug Standards
AC Power Adapter Model: AD-0901000AK
AC Power Adapter Model: JAA-0901000AS
Input Power: AC230Volts/50Hz/0.2A
Input Power: AC240Volts/50Hz/130mA
Output Power: AC 9Volts/1.0A
Output Power: AC 9Volts/1.0A
Power Consumption: 10 W
Power Consumption: 10 W
Safety Standards: TUV, CE (EN 60950, BS 7002)
Safety Standards: NATA (AS 3260)

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top