1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P324
    5. /
  5. 39
Page 191 / 285 Scroll up to view Page 186 - 190
A
System Information & Diagnosis
16-1
Chapter 16
System Information & Diagnosis
This chapter covers SMT menus 24.1 to 24 .4.
This chapter covers the diagnostic tools that help you to maintain your Prestige. These tools include
updates on system status, port status, log and trace capabilities and upgrades for the system software.
Select menu 24 in the main menu to open
Menu 24 - System Maintenance
, as shown below.
Figure 16-1 Menu 24 — System Maintenance
16.1 System Status
The first selection, System Status, gives you information on the version of your system firmware and the
status and statistics of the ports, as shown in the next figure. System Status is a tool that can be used to
monitor your Prestige. Specifically, it gives you information on your system firmware version, number of
packets sent and number of packets received.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
Page 192 / 285
P
GE 16-10
Call SchedulingRemote Management
16.1.1 To get to the System Status:
•
Enter 24 to display Menu 24 - System Maintenance.
•
In this menu, enter number 1
to open
System Maintenance - Status
.
•
There are three commands in
Menu 24.1 - System Maintenance - Status
. Entering 1 drops the WAN
(PPTP/PPPoE) connection, 9 resets the counters and
[ESC]
takes you back to the previous screen.
The table below describes the fields present in
Menu 24.1 - System Maintenance - Status
. It should be
noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.
Figure 16-2 Menu 24.1 — System Maintenance — Status
The following table describes the fields present in
Menu 24.1 - System Maintenance - Status
.
Table 16-1 System Maintenance — Status Menu Fields
FIELD
DESCRIPTION
Port
The WAN or LAN port.
Status
Shows the port speed and duplex setting if you’re using
Ethernet
Encapsulation
and
Down
(line is down),
idle
(line (ppp) idle),
dial
(starting to
trigger a call) and
drop
(dropping a call) if you’re using
PPPoE Encapsulation
.
TxPkts
The number of transmitted packets on this port.
Menu 24.1 - System Maintenance - Status
00:15:16
Sat. Jan. 01, 2000
Port
Status
TxPkts
RxPkts
Cols
Tx B/s
Rx B/s
Up Time
WAN
Down
0
0
0
0
0
0:00:00
LAN
100M/Full
86
0
0
0
0
0:15:14
Port
Ethernet Address
IP Address
IP Mask
DHCP
WAN
00:A0:C5:01:23:46
0.0.0.0
0.0.0.0
Client
LAN
00:A0:C5:01:23:45
192.168.1.1
255.255.255.0
Server
System up Time:
0:15:19
Name:
Routing: IP
ZyNOS F/W Version: V3.60(JA.0)Xmas
Press Command:
COMMANDS: 1-Drop WAN 9-Reset Counters
ESC-Exit
Page 193 / 285
A
System Information & Diagnosis
16-3
Table 16-1 System Maintenance — Status Menu Fields
FIELD
DESCRIPTION
RxPkts
The number of received packets on this port.
Cols
The number of collisions on this port.
Tx B/s
Shows the transmission speed in Bytes per second on this port.
Rx B/s
Shows the reception speed in Bytes per second on this port.
Up Time
Total amount of time the line has been up.
LAN
Ethernet Address
The LAN port Ethernet address.
IP Address
The LAN port IP address.
IP Mask
The LAN port IP mask.
DHCP
The LAN port DHCP role.
WAN
Ethernet Address
The WAN port Ethernet address.
IP Address
The WAN port IP address.
IP Mask
The WAN port IP mask.
DHCP
The WAN port DHCP role.
System up Time
The total time the Prestige has been on.
Name
This is the Prestige's system name + domain name assigned in menu 1. e.g.,
System Name= xxx; Domain Name= baboo.mickey.com.
Name= xxx.baboo.mickey.com
ZyNOS F/W Version
The ZyNOS Firmware version and the date created.
You may enter 1 to drop the PPPoE/PPTP connection, 9 to reset the counters or [ESC] to return to menu
24.
16.2 System Information and Console Port Speed
This section describes your system and allows you to choose different console port speeds. To get to the
system information and console port speed:
Page 194 / 285
P
GE 16-10
Call SchedulingRemote Management
Enter 24 to go to
Menu 24 - System Maintenance
.
Enter 2 to open
Menu 24.2 - System Information and Console Port Speed
.
From this menu you have two choices as shown in the next figure:
Figure 16-3 Menu 24.2 — System Information and Console Port Speed
16.2.1 System Information
Menu 24.2.1 - System Maintenance - Information
gives you information about your system as shown
below. More specifically, it gives you information on your routing protocol, country code, Ethernet
address, IP address, etc.
Figure 16-4 Menu 24.2.1 System Maintenance — Information
Menu 24.2.1 - System Maintenance - Information
Name:
Routing: IP
ZyNOS F/W Version: V3.60(JA.0)Xmas
LAN
Ethernet Address: 00:A0:C5:01:23:45
IP Address: 192.168.1.1
IP Mask: 255.255.255.0
DHCP: Server
Press ESC or RETURN to Exit:
Menu 24.2 - System Information and Console Port Speed
1. System Information
2. Console Port Speed
Please enter selection:
Page 195 / 285
A
System Information & Diagnosis
16-5
Table 16-2 Fields in System Maintenance
FIELD
DESCRIPTION
Name
This is the Prestige's system name + domain name assigned in menu 1. E.G.,
System Name= Prestige; Domain Name=
zyxel.com
Name= P324.
zyxel.com
Routing
Refers to the routing protocol used.
ZyNOS F/W Version
Refers to the version of ZyXEL's Network Operating System software.
Ethernet Address
Refers to the Ethernet MAC (Media Access Control) address of your Prestige.
IP Address
This is the IP address of the Prestige in dotted decimal notation.
IP Mask
This shows the subnet mask of the Prestige.
DHCP
This field shows the DHCP setting of the Prestige.
16.2.2 Console Port Speed
You can change the speed of the console port through
Menu 24.2.2
—
Console Port Speed
. Your Prestige
supports 9600 (default), 19200, 38400, 57600, and 115200 bps for the console port. The recommended
maximum port speed fort he Prestige is 57600. Use the
[SPACE BAR]
to select the desired speed in menu
24.2.2, as shown next.
Figure 16-5 Menu 24.2.2 — System Maintenance — Change
Console Port Speed
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top