1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-2612HNU-F1F PLDT
    5. /
  5. 49
Page 241 / 424 Scroll up to view Page 236 - 240
Chapter 16 VoIP
P-2612HNU-Fx User’s Guide
241
these configuration changes you need to configure the
Phone Device
screen. See
Section 16.6 on page 243
.
Figure 96
Outgoing Calls: Individual Configuration
16.4.2
Incoming Calls
The following example shows the default behavior of your ZyXEL Device for
incoming calls when two SIP accounts are configured and you are using two
phones. When a call comes in from your SIP account 1, the phones connected to
both phone port 1 and phone port 2 ring. Similarly, when a call comes in from your
SIP account 2, the phones connected to both phone port 1 and phone port 2 ring.
In either case you are not sure which SIP account the call is coming from.
Figure 97
Incoming Calls: Default
SIP 1
SIP 2
PHONE 1
PHONE 2
SIP 1
SIP 2
PHONE 1
PHONE 2
Page 242 / 424
Chapter 16 VoIP
P-2612HNU-Fx User’s Guide
242
In the next example, phone port 1 is configured to use SIP account 1 and phone
port 2 is configured to use SIP account 2 for incoming calls. In this case, every
time you receive a call from your SIP account 1, the phone connected to phone
port 1 rings. Similarly, every time you receive a call from your SIP account 2,
phone port 2 rings. To apply these configuration changes you need to configure
the
Phone Device
screen. See
Section 16.6 on page 243
.
Figure 98
Incoming Calls: Individual Configuration
16.5
The Common Screen
Use the
Common
screen to configure RFC3262 support on the ZyXEL Device. To
access the following screen, click
VoIP > SIP > Common
.
Figure 99
VoIP > SIP > Common
SIP 1
SIP 2
PHONE 1
PHONE 2
Page 243 / 424
Chapter 16 VoIP
P-2612HNU-Fx User’s Guide
243
Each field is described in the following table.
16.6
The Phone Device Screen
Use this screen to control which SIP accounts and PSTN line each phone uses.
Click
VoIP > Phone
to access the
Phone Device
screen.
Figure 100
VoIP > Phone > Phone Device
The following table describes the labels in this screen.
Table 60
VoIP > SIP > Common
LABEL
DESCRIPTION
RFC Support
PRACK (RFC
3262)
RFC 3262 defines a mechanism to provide reliable transmission of SIP
provisional response messages, which convey information on the
processing progress of the request. This uses the option tag 100rel and
the Provisional Response ACKnowledgement (PRACK) method.
Select
Supported
or
Required
to have the ZyXEL Device include a SIP
Require/Supported header field with the option tag 100rel in all INVITE
requests. When the ZyXEL Device receives a SIP response message
indicating that the phone it called is ringing, the ZyXEL Device sends a
PRACK message to have both sides confirm the message is received.
If you select
Supported
, the peer device supports the option tag
100rel to send provisional responses reliably.
If you select
Required
, the peer device requires the option tag 100rel
to send provisional responses reliably.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to return to the previous screen without saving.
Table 61
VoIP > Phone > Phone Device
LABEL
DESCRIPTION
#
This is the index number of the entry.
Phone ID
This is the phone device number.
Outgoing SIP
Number
This is the outgoing SIP number of the phone device.
Modify
Click the
Edit
icon to configure the SIP account.
Page 244 / 424
Chapter 16 VoIP
P-2612HNU-Fx User’s Guide
244
16.6.1
Edit Phone Device
You can edit an SIP account by clicking the
Edit
icon next to an SIP account entry.
You cannot edit the account if it is not activated. Go to
VoIP > SIP > SIP
Account > Edit
to activate an SIP account (see
Section 16.3.1 on page 237
for
more information).
Figure 101
Phone Device: Edit
The following table describes the labels in this screen.
Table 62
Phone Device: Edit
LABEL
DESCRIPTION
SIP Account to Make Outgoing Call
SIP Account
Select the SIP account you want to use when making outgoing calls
with the analog phone connected to this phone port.
SIP Number
This shows the SIP account number.
SIP Account(s) to Receive Incoming Call
SIP Account
Select a SIP account if you want to receive phone calls for the selected
SIP account on this phone port.
If you select more than one SIP account for incoming calls, there is no
way to distinguish between them when you receive phone calls. If you
do not select a source for incoming calls, you cannot receive any calls
on this phone port.
SIP Number
This shows the SIP account number.
Apply
Click
Apply
to save your changes.
Back
Click
Back
to return to the previous screen without saving.
Page 245 / 424
Chapter 16 VoIP
P-2612HNU-Fx User’s Guide
245
16.7
The Region Screen
Use this screen to maintain settings that depend on which region of the world the
ZyXEL Device is in. To access this screen, click
VoIP > Phone > Region
.
Figure 102
VoIP > Phone > Region
Each field is described in the following table.
16.8
The Call Rule Screen
Use this screen to add, edit, or remove speed-dial numbers for outgoing calls.
Speed dial provides shortcuts for dialing frequently-used (VoIP) phone numbers.
You also have to create speed-dial entries if you want to call SIP numbers that
contain letters. Once you have configured a speed dial rule, you can use a shortcut
(the speed dial number, #01 for example) on your phone's keypad to call the
phone number.
Table 63
VoIP > Phone > Region
LABEL
DESCRIPTION
Region Settings
Select the place in which the ZyXEL Device is located.
Apply
Click
Apply
to save your changes.

Rate

3.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top