Page 51 / 424
Scroll up to view Page 46 - 50
Chapter 3 Tutorials
P-2612HNU-Fx User’s Guide
51
3.5
How to Make a VoIP Call
You can register a SIP account with the SIP server and make voice calls over the
Internet to another VoIP device.
The following parameters are used in this example:
3.5.1
VoIP Calls With a Registered SIP Account
To use a registered SIP account, you should configure the SIP service provider and
applied for a SIP account.
3.5.1.1
SIP Service Provider Configuration
Follow the steps below to configure your SIP service provider.
1
Make sure your ZyXEL Device is connected to the Internet.
2
Open the web configurator.
3
Click
VoIP > SIP
to open the
SIP Service Provider
screen. Select
Add New
from the
Service Provider Selection
drop-down list box.
SIP Service Provider Name
ServiceProvider1
SIP Account Number
12345678
Username
ChangeMe
Password
ThisIsMySIP
Page 52 / 424
Chapter 3 Tutorials
P-2612HNU-Fx User’s Guide
52
4
Select the
Enable
check box of
SIP Service Provider
and enter the
SIP Service
Provider Name
.
5
Go to the
SIP Account
screen, click the
Edit
icon of
SIP 3
.
6
Select the
Active SIP Account
check box, then enter the
SIP Account Number
,
Username
, and
Password
. Leave other settings as default.
Page 53 / 424
Chapter 3 Tutorials
P-2612HNU-Fx User’s Guide
53
7
Click
Apply
to save your settings.
3.5.1.2
SIP Account Registration
Follow the steps below to register and activate your SIP account.
1
Click
Connection Status > System Info
to check if your SIP account has been
registered successfully. If the status is
Not Registered
, check your Internet
connection and click
Register
to register your SIP account.
Tutorial: Registration Status
3.5.1.3
Analog Phone Configuration
1
Click
VoIP > Phone
to open the
Phone Device
screen. Click the
Edit
icon next
to
Analog Phone 1
to configure the first phone port.
2
Select
SIP 3
from the
SIP Account
in the
SIP Account to Make Outgoing Call
section to have the phone (connected to the first phone port) use the registered
SIP 3 account to make outgoing calls.
Page 54 / 424
Chapter 3 Tutorials
P-2612HNU-Fx User’s Guide
54
3
Select the
SIP 3
check box in the
SIP Account(s) to Receive Incoming Call
section to have the phone (connected to the first phone port) receive phone calls
for the SIP 3 account.
4
Click
Apply
to save your changes.
Tutorial: VoIP > Phone
3.5.1.4
Making a VoIP Call
1
Make sure you connect a telephone to the first phone port on the ZyXEL Device.
2
Make sure the ZyXEL Device is on and connected to the Internet.
3
Pick up the phone receiver.
4
Dial the VoIP phone number you want to call.
3.6
Using the File Sharing Feature
In this section you can:
•
Set up file sharing of your USB device from the ZyXEL Device
•
Access the shared files of your USB device from a computer
3.6.1
Set Up File Sharing
To set up file sharing you need to connect your USB device, enable file sharing and
set up your share(s).
Page 55 / 424
Chapter 3 Tutorials
P-2612HNU-Fx User’s Guide
55
3.6.1.1
Activate File Sharing
1
Connect your USB device to one of the USB ports at the back panel of the ZyXEL
Device.
2
Click
Network Setting > Home Networking > File Sharing
. Select
Enable
and click
Apply
to activate the file sharing function. The ZyXEL Device
automatically adds your USB device to the
Share Directory List
.
3.6.1.2
Set up File Sharing on Your ZyXEL Device
You also need to set up file sharing on your ZyXEL Device in order to share files.
1
Click
Add new share
in the
File Sharing
screen to configure a new share. Select
your USB device from the
Volume
drop-down list box.
2
Click
Browse
to browse through all the files on your USB device. Select the folder
that you want to add as a share. In this example, select
Bob’s_Share
. Click
Apply
.
19216811.live