Prestige 2602HW Series Quick Start Guide

16

4.3 Checking/Updating Your Computer’s IP Address

1.

In the computer, click

Start

, (

All) Programs

,

Accessories

and then

Command

Prompt

.

2.

In the

Command Prompt

window, type "ipconfig" and then press

ENTER

to verify

that your computer’s IP address is in the correct range (192.168.1.2 to

192.168.1.254) with subnet mask 255.255.255.0. This is necessary in order to

communicate with the Prestige.

Refer to your

User’s Guide

for detailed IP address configuration for other Windows and

Macintosh computer operating systems.

4.4 Testing the Connection to the Prestige

1.

Click

Start

, (

All

)

Programs

,

Accessories

and then

Command Prompt

.

2.

In the

Command Prompt

window, type "ping” followed by a space and the IP

address of the Prestige (192.168.1.1 is the default).

3.

Press

ENTER

and the following screen displays.

Prestige 2602HW Series Quick Start Guide

17

Your computer can now communicate with the Prestige using the

LAN

port.

5

Configuring Your Prestige

The web configurator is an HTML-based management interface that allows easy

Prestige setup and management via Internet browser. Use Internet Explorer 6.0 and later

or Netscape Navigator 7.0 and later versions with JavaScript enabled. Recommended

screen resolution is 1024 by 768 pixels.

This

Quick Start Guide shows

you how to use the web

configurator only. See your

User’s Guide

for background

information on all Prestige features and SMT (System

Management Terminal) configuration.

5.1 Accessing Your Prestige Via Web Configurator

Even though you can connect to the Prestige wirelessly, it is

recommended that you connect your computer to a LAN port for

initial configuration.

1.

Launch your web browser. Enter “192.168.1.1” as the web site address.

Web site address

C:\>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time=10ms TTL=254

Reply from 192.168.1.1: bytes=32 time<10ms TTL=254

Reply from 192.168.1.1: bytes=32 time<10ms TTL=254

Reply from 192.168.1.1: bytes=32 time<10ms TTL=254

Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum =

10ms, Average =

2ms

Prestige 2602HW Series Quick Start Guide

18

Figure 4 Entering Prestige LAN IP Address in Internet Explorer

2.

An

Enter Network Password

window displays. Enter the user name (“admin” is

the default), password (“1234” is the default). Click

Login

to proceed to a screen

asking you to change your password. Click

Reset

to revert to the default password

in the password field

Figure 5 Web Configurator: Password Screen

3.

It is highly recommended you change the default password! Enter a new password,

retype it to confirm and click

Apply

; alternatively click

Ignore

to proceed to the

main menu if you do not want to change the password now.

4.

You should now see the web configurator

Site Map

screen.

¾

Click

Wizard Setup

to begin a series of screens to configure your Prestige for

the first time.

¾

Click a link under

Advanced Setup

to configure advanced Prestige features.

¾

Click a link under

Maintenance

to see Prestige performance statistics, upload

firmware and back up, restore or upload a configuration file.

Default password.

Prestige 2602HW Series Quick Start Guide

19

¾

Click

Logout

in the navigation panel when you have finished a Prestige

management session.

Figure 6 Web Configurator: Site Map Screen

The Prestige automatically logs you out if the management

session is idle for five minutes. Log back in if this happens.

5.2 Common Screen Command Buttons

This table shows common command buttons found on many web configurator screens.

Back

Click

Back

to return to the previous screen.

Apply

Click

Apply

to save your changes back to the Prestige.

Reset/Cancel

Click

Reset

or

Cancel

to begin configuring this screen afresh.

5.3 Using the Wizard for Initial Configuration

Use the Wizard Setup screens to configure the Prestige’s Internet access and VoIP

settings with information from

1.1 Required Information

. Your ISP may have already

configured some of the fields in the wizard screens for you.

1.

In the

Site Map

screen, click

Wizard Setup

to display the first wizard screen.

WIZARD

Navigation panel

LOGOUT

Prestige 2602HW Series Quick Start Guide

20

Figure 7 Wizard Screen 1

From the

Mode

drop-down list box, select

Routing

(default) if your ISP allows

multiple computers to share an Internet

account. Otherwise select

Bridge

.

Select the encapsulation type your ISP

uses from the

Encapsulation

drop-down

list box. Choices vary depending on what

you select in the

Mode

field.

Select the multiplexing method used by

your ISP from the

Multiplex

drop-down

list box.

Enter the correct Virtual Path Identifier

(VPI) and Virtual Channel Identifier (VCI)

numbers supplied by your ISP in the

VPI

and

VCI

fields. These fields may already

be configured.

Click

Next

.

2.

The second wizard screen varies depending on what mode and encapsulation type

you use. All screens shown are with routing mode. Configure the fields and click

Next

to continue.