Prestige 2602HW Series Quick Start Guide

6

Figure 1 Rear Panel Hardware Connections

Table 1 Rear Panel Description

LABEL

DESCRIPTION

1.

DSL

Connect to a telephone jack using the included telephone wire.

2.

LAN 1..4

Connect to a computer/external hub using an Ethernet cable.

3.

PHONE

1~2

Connect analog telephones to these ports using telephone wire.

These are also known as FXS (Foreign Exchange Station) ports.

4.

POWER

18V DC

Connect to a power source using only the included power adaptor for

your region (see your

User’s Guide

).

After you’ve made the connections, connect the power adaptor to a power supply and

push in the power button to turn on the Prestige.

The

PWR/SYS

LED blinks while performing system testing and then turns steady on if

the testing is successful.

A

LAN

LED turns on if a LAN port is properly connected.

Prestige 2602HW Series Quick Start Guide

7

Table 1 Rear Panel Description

LABEL

DESCRIPTION

CONSOLE

Only connect this port if you want to configure the Prestige using the

SMT via console port see your User's Guide for details.

Use the console port for local device configuration and management.

Connect one end of the console cable to the console port of the

Prestige and the other end to a serial port (COM1, COM2 or other

COM port) on your computer. Your computer should have a terminal

emulation communications program (such as HyperTerminal) set to

VT100 terminal emulation, no parity, 8 data bits, 1 stop bit, no flow

control and 9600 bps port speed.

RESET

You only need to use this button if you’ve forgotten the Prestige’s

password. It returns the Prestige to the factory defaults (password is

1234, LAN IP address 192.168.1.1 etc.; see your

User’s Guide

for

details).

2.3 Prestige 2602HWL

Use both VoIP and regular phone services with the Prestige 2602HWL’s lifeline feature.

Make and receive regular phone calls while someone else connected to the Prestige is

making VoIP calls.

Prestige 2602HW Series Quick Start Guide

8

Figure 2 Prestige 2602HWL Phone and DSL Connections

The

DSL

port handles both the ADSL and regular telephone service connections. The

phone line port is also known as an FXO (Foreign Exchange Office) port.

1.

The P2602HWL includes a v-shaped cable with one black wire and one gray wire.

Connect the end where the wires join to the P2602HWL’s

DSL

port.

2.

Connect the black wire to the “modem” jack on a telephone or ISDN splitter (not

included).

3.

Connect the gray wire to the splitter’s “phone” jack or a telephone wall jack.

"

If you are using T-ISDN (UR-2), connect the gray wire to the (included) UR-

2 to TAE connector before connecting it to the telephone splitter’s “phone”

jack or a telephone wall jack.

4.

Connect the splitter’s “line” jack to a telephone (or ISDN) wall jack.

Prestige 2602HW Series Quick Start Guide

9

2.4 Front Panel LEDs

Figure 3 Front Panel

Table 2 Front Panel LED Descriptions

LED

COLOR

STATUS

DESCRIPTION

On

The Prestige is receiving power and

functioning properly.

Green

Blinking

The Prestige is rebooting.

On

Power to the Prestige is too low.

Red

Blinking

The Prestige is receiving power but not

functioning properly.

PWR/ SYS

Off

The system is not ready or has

malfunctioned.

Prestige 2602HW Series Quick Start Guide

10

Table 2 Front Panel LED Descriptions

LED

COLOR

STATUS

DESCRIPTION

On

Successful 10Mb Ethernet connection.

Green

Blinking

The Prestige is sending/receiving data.

On

The Prestige has a successful 100Mb

Ethernet connection.

Amber

Blinking

The Prestige is sending/receiving data.

LAN 1.. 4

Off

The LAN is not connected.

On

The Prestige is ready, but not sending/

receiving data through the wireless LAN.

Green

Blinking

The Prestige is sending/receiving data

through the wireless LAN.

WLAN

Off

The wireless LAN is not ready or has failed.

Fast Blinking

The Prestige is sending/receiving non-PPP

data.

Slow Blinking

The Prestige is initializing the DSL line.

Green

On

The DSL link is up.

On

The connection to the PPPoE server is up.

Amber

Blinking

The Prestige is sending/receiving PPP data.

DSL/ PPP

Off

The DSL link is down.

VoIP

Green

On

The VoIP SIP registration is OK.

Blinking

The Prestige is sending/receiving VoIP traffic.

Off

The VoIP SIP registration failed.

Green

On

The telephone(s) connected to this port is

(are) in use.

Phone 1-2

Blinking

The telephone(s) connected to this port is

(are) ringing.

Off

The telephone(s) connected to this port is

(are) not in use.