P-2602H(W)(L)-DxA Series User’s Guide

Chapter 3 Internet and Wireless Setup Wizard

61

2

The next wizard screen varies depending on what mode and encapsulation type you use.

All screens shown are with routing mode. Configure the fields and click

Next

to continue.

See

Section 3.3 on page 65

for wireless connection wizard setup

Figure 17

Internet Connection with PPPoE

The following table describes the fields in this screen.

Next

Click

Next

to continue to the next wizard screen. The next wizard screen you see

depends on what protocol you chose above.

Exit

Click

Exit

to close the wizard screen without saving your changes.

Table 8

Internet Connection with PPPoE

LABEL

DESCRIPTION

User Name

Enter the user name exactly as your ISP assigned. If assigned a name in the form

user@domain where domain identifies a service name, then enter both components

exactly as given.

Password

Enter the password associated with the user name above.

Service Name

Type the name of your PPPoE service here.

Back

Click

Back

to go back to the previous wizard screen.

Apply

Click

Apply

to save your changes back to the ZyXEL Device.

Exit

Click

Exit

to close the wizard screen without saving your changes.

Table 7

Internet Access Wizard Setup: ISP Parameters

LABEL

DESCRIPTION

P-2602H(W)(L)-DxA Series User’s Guide

62

Chapter 3 Internet and Wireless Setup Wizard

Figure 18

Internet Connection with RFC 1483

The following table describes the fields in this screen.

Figure 19

Internet Connection with ENET ENCAP

Table 9

Internet Connection with RFC 1483

LABEL

DESCRIPTION

IP Address

This field is available if you select

Routing

in the

Mode

field.

Type your ISP assigned IP address in this field.

Back

Click

Back

to go back to the previous wizard screen.

Next

Click

Next

to continue to the next wizard screen.

Exit

Click

Exit

to close the wizard screen without saving your changes.

P-2602H(W)(L)-DxA Series User’s Guide

Chapter 3 Internet and Wireless Setup Wizard

63

The following table describes the fields in this screen.

Figure 20

Internet Connection with PPPoA

The following table describes the fields in this screen.

Table 10

Internet Connection with ENET ENCAP

LABEL

DESCRIPTION

Obtain an IP

Address

Automatically

A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not

fixed; the ISP assigns you a different one each time you connect to the Internet.

Select

Obtain an IP Address Automatically

if you have a dynamic IP address.

Static IP

Address

Select

Static IP Address

if your ISP gave you an IP address to use.

IP Address

Enter your ISP assigned IP address.

Subnet Mask

Enter a subnet mask in dotted decimal notation.

Refer to the appendix

to calculate a subnet mask If you are implementing subnetting.

Gateway IP

address

You must specify a gateway IP address (supplied by your ISP) when you use

ENET

ENCAP

in the

Encapsulation

field in the previous screen.

First DNS

Server

Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP

clients along with the IP address and the subnet mask.

Second DNS

Server

As above.

Back

Click

Back

to go back to the previous wizard screen.

Apply

Click

Apply

to save your changes back to the ZyXEL Device.

Exit

Click

Exit

to close the wizard screen without saving your changes.

Table 11

Internet Connection with PPPoA

LABEL

DESCRIPTION

User Name

Enter the login name that your ISP gives you.

Password

Enter the password associated with the user name above.

P-2602H(W)(L)-DxA Series User’s Guide

64

Chapter 3 Internet and Wireless Setup Wizard

•

If the user name and/or password you entered for PPPoE or PPPoA connection are not

correct, the screen displays as shown next. Click

Back to Username and Password

setup

to go back to the screen where you can modify them.

Figure 21

Connection Test Failed-1

•

If the following screen displays, check if your account is activated or click

Restart the

Internet/Wireless Setup Wizard

to verify your Internet access settings.

Figure 22

Connection Test Failed-2.

Back

Click

Back

to go back to the previous wizard screen.

Apply

Click

Apply

to save your changes back to the ZyXEL Device.

Exit

Click

Exit

to close the wizard screen without saving your changes.

Table 11

Internet Connection with PPPoA (continued)

LABEL

DESCRIPTION

P-2602H(W)(L)-DxA Series User’s Guide

Chapter 3 Internet and Wireless Setup Wizard

65

3.3

Wireless Connection Wizard Setup

After you configure the Internet access information, use the following screens to set up your

wireless LAN.

1

Select

Yes

and click

Next

to configure wireless settings. Otherwise, select

No

and skip to

Step

6

.

Figure 23

Connection Test Successful

2

Use this screen to activate the wireless LAN and OTIST. Click

Next

to continue.

Figure 24

Wireless LAN Setup Wizard 1