P-2602H(W)(L)-DxA Series User’s Guide
60
Chapter 3 Internet and Wireless Setup Wizard
SIP provider gave it to you. Leave the defaults in any fields for which you were not given 
information.
Figure 16 
Internet Access Wizard Setup: ISP Parameters
The following table describes the fields in this screen.
Table 7 
Internet Access Wizard Setup: ISP Parameters
LABEL
DESCRIPTION
Mode
From the 
Mode 
drop-down list box, select 
Routing 
(default) if your ISP allows 
multiple computers to share an Internet account. Otherwise select 
Bridge
. 
Encapsulation
Select the encapsulation type your ISP uses from the 
Encapsulation 
drop-down list 
box. Choices vary depending on what you select in the 
Mode 
field. 
If you select 
Bridge
in the Mode field, select either 
PPPoA
or 
RFC 1483
. 
If you select 
Routing
in the Mode field, select 
PPPoA
, 
RFC 1483
, 
ENET ENCAP
or 
PPPoE
.
Multiplexing
Select the multiplexing method used by your ISP from the 
Multiplex 
drop-down list 
box either VC-based or LLC-based. 
Virtual Circuit 
ID
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit. 
Refer to the appendix
for more information.
VPI
Enter the VPI assigned to you. This field may already be configured.
VCI
Enter the VCI assigned to you. This field may already be configured.
Back
Click 
Back
to go back to the previous screen.