1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-2601HN-F1
    5. /
  5. 38
Page 186 / 344 Scroll up to view Page 181 - 185
Chapter 16 VoIP
P-2601HN(L)-F1 Series User’s Guide
186
16.4
The SIP Common Screen
Use the
Common
screen to configure RFC3262 support on the ZyXEL Device. To
access the following screen, click
VoIP > SIP > Common
.
Figure 84
VoIP > SIP > Common
Each field is described in the following table.
Table 50
VoIP > SIP > Common
LABEL
DESCRIPTION
Bound Interface Name
Bound Interface
Name
If you select
LAN
or
AnyWAN
, the ZyXEL Device automatically
activates the VoIP service when any LAN or WAN connection is up.
If you select
MultiWAN
, you also need to select the pre-configured
WAN connections. The VoIP service is activated only when the selected
WAN connection is up.
RFC Support
PRACK (RFC
3262)
RFC 3262 defines a mechanism to provide reliable transmission of SIP
provisional response messages, which convey information on the
processing progress of the request. This uses the option tag 100rel and
the Provisional Response ACKnowledgement (PRACK) method.
Select
Supported
or
Required
to have the ZyXEL Device include a SIP
Require/Supported header field with the option tag 100rel in all INVITE
requests. When the ZyXEL Device receives a SIP response message
indicating that the phone it called is ringing, the ZyXEL Device sends a
PRACK message to have both sides confirm the message is received.
If you select
Supported
, the peer device supports the option tag
100rel to send provisional responses reliably.
If you select
Required
, the peer device requires the option tag 100rel
to send provisional responses reliably.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to return to the previous screen without saving.
Page 187 / 344
Chapter 16 VoIP
P-2601HN(L)-F1 Series User’s Guide
187
16.5
The Phone Device Screen
Use this screen to control which SIP account the phone uses. Click
VoIP > Phone
to access the
Phone Device
screen.
Figure 85
VoIP > Phone > Phone Device
The following table describes the labels in this screen.
16.5.1
Edit Phone Device
You can edit the SIP account by clicking the
Edit
icon next it. You cannot edit the
account if it is not activated. Go to
VoIP > SIP > SIP Account > Edit
to activate
an SIP account (see
Section 16.3.1 on page 183
for more information).
Figure 86
Phone Device: Edit
Table 51
VoIP > Phone > Phone Device
LABEL
DESCRIPTION
#
This is the index number of the entry.
Phone ID
This is the phone device number.
Outgoing SIP
Number
This is the outgoing SIP number of the phone device.
Modify
Click the
Edit
icon to configure the SIP account.
Page 188 / 344
Chapter 16 VoIP
P-2601HN(L)-F1 Series User’s Guide
188
The following table describes the labels in this screen.
16.6
The Region Screen
Use this screen to maintain settings that depend on which region of the world the
ZyXEL Device is in. To access this screen, click
VoIP > Phone > Region
.
Figure 87
VoIP > Phone > Region
Each field is described in the following table.
Table 52
Phone Device: Edit
LABEL
DESCRIPTION
SIP Account to Make Outgoing Call
SIP Account
Select the SIP account you want to use when making outgoing calls
with the analog phone connected to this phone port.
SIP Number
This shows the SIP account number.
SIP Account(s) to Receive Incoming Call
SIP Account
Select a SIP account if you want to receive phone calls for the selected
SIP account on this phone port.
If you select more than one SIP account for incoming calls, there is no
way to distinguish between them when you receive phone calls. If you
do not select a source for incoming calls, you cannot receive any calls
on this phone port.
SIP Number
This shows the SIP account number.
FXO Interface to Receive Incoming Call
Enable
Select this if you want to receive phone calls from the PSTN line (that
do not use the Internet) on this phone port.
Apply
Click
Apply
to save your changes.
Back
Click
Back
to return to the previous screen without saving.
Table 53
VoIP > Phone > Region
LABEL
DESCRIPTION
Region Settings
Select the place in which the ZyXEL Device is located.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Page 189 / 344
Chapter 16 VoIP
P-2601HN(L)-F1 Series User’s Guide
189
16.7
The Call Rule Screen
Use this screen to add, edit, or remove speed-dial numbers for outgoing calls.
Speed dial provides shortcuts for dialing frequently-used (VoIP) phone numbers.
You also have to create speed-dial entries if you want to call SIP numbers that
contain letters. Once you have configured a speed dial rule, you can use a shortcut
(the speed dial number, #01 for example) on your phone's keypad to call the
phone number.
To access this screen, click
VoIP > Phone > Call Rule
.
Figure 88
VoIP > Phone > Call Rule
Each field is described in the following table.
Table 54
VoIP > Phone > Call Rule
LABEL
DESCRIPTION
Speed Dial
Use this section to create or edit speed-dial entries.
#
Select the speed-dial number you want to use for this phone number.
Number
Enter the SIP number you want the ZyXEL Device to call when you dial
the speed-dial number.
Description
Enter a short description to identify the party you call when you dial the
speed-dial number. You can use up to 127 printable ASCII characters.
Add
Click this to use the information in the
Speed Dial
section to update
the
Speed Dial Phone Book
section.
Phone Book
Use this section to look at all the speed-dial entries and to erase them.
#
This field displays the speed-dial number you should dial to use this
entry.
Page 190 / 344
Chapter 16 VoIP
P-2601HN(L)-F1 Series User’s Guide
190
16.8
The FXO Screen (“L” Models Only)
With PSTN line you can make and receive regular PSTN phone calls. Use a prefix
number to make a regular call. When the device does not have power, you can
make regular calls without dialing a prefix number.
Use the
FXO
screen to set up the PSTN line you use to make regular phone calls
which do not use the Internet. To access this screen, click
VoIP > FXO
.
Figure 89
VoIP > FXO
Number
This field displays the SIP number the ZyXEL Device calls when you dial
the speed-dial number.
Description
This field displays a short description of the party you call when you dial
the speed-dial number.
Modify
Use this field to edit or erase the speed-dial entry.
Click the
Edit
icon to copy the information for this speed-dial entry into
the
Speed Dial
section, where you can change it. Click
Add
when you
finish editing to change the configurations.
Click the
Delete
icon to erase this speed-dial entry.
Clear
Click this to erase all the speed-dial entries.
Cancel
Click this to set every field in this screen to its last-saved value.
Table 54
VoIP > Phone > Call Rule (continued)
LABEL
DESCRIPTION

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top