Chapter 14 MAC Filter
P-2601HN(L)-F1 Series User’s Guide
166
14.2
The MAC Filter Screen
Use the
MAC Filter
screen to allow wireless clients access to the ZyXEL Device. To
change your ZyXEL Device’s MAC filter settings, click
Security
>
MAC Filter
. The
screen appears as shown.
Figure 74
Security > MAC Filter
The following table describes the labels in this menu.
Table 42
Security > MAC Filter
LABEL
DESCRIPTION
MAC
Address
Filter
Select
Enable
to activate MAC address filtering.
Set
This is the index number of the MAC address.
Allow
Select
Allow
to permit access to the ZyXEL Device. MAC addresses not
listed will be denied access to the ZyXEL Device.
If you clear this, the
MAC Address
field for this set clears.
MAC
Address
Enter the MAC addresses of the wireless station that are allowed access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a
valid MAC address format, that is, six hexadecimal character pairs, for
example, 12:34:56:78:9a:bc.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.