Page 161 / 229 Scroll up to view Page 156 - 160
Chapter 22 USB Media Sharing
NBG6716 User’s Guide
161
1
In Windows Explorer’s Address bar type a double backslash “\\” followed by the IP address of the
NBG6716 (the default IP address of the NBG6716 in router mode is 192.168.1.1) and press
[ENTER]. A screen asking for password authentication appears. Type the user name and password
(Bob and 1234 in this example) and click
OK
.
Note: Once you log into the shared folder via your NBG6716, you do not have to relogin
unless you restart your computer.
Page 162 / 229
Chapter 22 USB Media Sharing
NBG6716 User’s Guide
162
2
You can also use the workgroup name to access files by browsing to the workgroup folder using the
folder tree on the left side of the screen. It is located under
My Network Places
. In this example
the workgroup name is the default “Workgroup”.
22.8.2
Use FTP to Share Files
You can use FTP to access the USB storage devices connected to the NBG6716. In this example, we
use the web browser to share files via FTP from the LAN. The way or screen you log into the FTP
server (on the NBG6716) varies depending on your FTP client. See your FTP client documentation
for more information.
You should have enabled file sharing and created a user account (Bob/1234 for example) with read
and write access to USB 1 in the
USB Media Sharing > FTP
screen.
1
In your web browser’s address or URL bar type “ftp://” followed by the IP address of the NBG6716
(the default LAN IP address of the NBG6716 in router mode is 192.168.1.1) and click
Go
or press
[ENTER].
Page 163 / 229
Chapter 22 USB Media Sharing
NBG6716 User’s Guide
163
2
A screen asking for password authentication appears. Enter the user name and password (you
configured in the
USB Media Sharing > FTP
screen) and click
Log On
.
3
The screen changes and shows you the folder for the USB storage device connected to your
NBG6716. Double-click the folder to display the contents in it.
Page 164 / 229
NBG6716 User’s Guide
164
C
HAPTER
23
Maintenance
23.1
Overview
This chapter provides information on the
Maintenance
screens.
23.2
What You Can Do
Use the
General
screen to set the timeout period of the management session (
Section 23.3 on
page 164
).
Use the
Password
screen to change your NBG6716’s system password (
Section 23.4 on page
165
).
Use the
Time
screen to change your NBG6716’s time and date (
Section 23.5 on page 166
).
Use the
Firmware Upgrade
screen to upload firmware to your NBG6716 (
Section 23.6 on page
167
).
Use the
Backup/Restore
screen to view information related to factory defaults, backup
configuration, and restoring configuration (
Section 23.8 on page 170
).
Use the
Restart
screen to reboot the NBG6716 without turning the power off (
Section 23.8 on
page 170
).
Use the
Language
screen to change the language for the Web Configurator (
Section 23.9 on
page 170
).
Use the
Sys OP Mode
screen to select how you want to use your NBG6716 (
Section 23.11 on
page 172
).
23.3
General Screen
Use this screen to set the management session timeout period. Click
Maintenance
>
General
.
The following screen displays.
Figure 118
Maintenance > General
Page 165 / 229
Chapter 23 Maintenance
NBG6716 User’s Guide
165
The following table describes the labels in this screen.
23.4
Password Screen
It is strongly recommended that you change your NBG6716's password.
If you forget your NBG6716's password (or IP address), you will need to reset the device. See
Section 23.8 on page 170
for details.
Click
Maintenance
>
Password
. The screen appears as shown.
Figure 119
Maintenance > Password
The following table describes the labels in this screen.
Table 68
Maintenance > General
LABEL
DESCRIPTION
System Name
System Name is a unique name to identify the NBG6716 in an Ethernet network.
Domain Name
Enter the domain name you want to give to the NBG6716.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Apply
Click
Apply
to save your changes back to the NBG6716.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 69
Maintenance > Password
LABEL
DESCRIPTION
Password Setup
Change your NBG6716’s password (recommended) using the fields as shown.
Old Password
Type the default password or the existing password you use to access the system in
this field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm
Type the new password again in this field.
Apply
Click
Apply
to save your changes back to the NBG6716.
Cancel
Click
Cancel
to begin configuring this screen afresh.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top