Page 181 / 268
Scroll up to view Page 176 - 180
Chapter 19 Logs
NBG4604 User’s Guide
181
19.5
Log Settings Screen
Use this screen to send copies of the NBG4604 syslog files to a dedicated syslog
server. For information on setting up a syslog server, consult the documentation
that came with your syslog server product.
Click
Maintenance
>
Logs > Log Settings
to open this screen.
Figure 111
Maintenance > Logs > Log Settings
The following table describes the labels in this screen.
Table 71
Maintenance > Logs > Log Settings
LABEL
DESCRIPTION
Active
Select this to enable syslog logging on this device.
Syslog Server IP
Address
Enter the IP address of the syslog server to receive syslogs from this
device.
Apply
Click
Apply
to save the setting to the NBG4604.
Reset
Click
Reset
to begin configuring this screen afresh.
Page 183 / 268
NBG4604 User’s Guide
183
C
HAPTER
20
Tools
20.1
Overview
This chapter shows you how to upload a new firmware, upload or save backup
configuration files and restart the NBG4604.
20.2
What You Can Do
•
Use the
Firmware
screen (
Section 20.3 on page 183
) to upload firmware to
your NBG4604.
•
Use the
Configuration
screen (
Section 20.4 on page 186
) to view information
related to factory defaults, backup configuration, and restoring configuration.
•
Use the
Restart
screen (
Section 20.5 on page 188
) to have the NBG4604
reboot.
20.3
Firmware Upload Screen
Find firmware at
www.zyxel.com
in a file that (usually) uses the system model
name with a “*.bin” extension, e.g., “NBG4604.bin”. The upload process uses
HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a
successful upload, the system will reboot.
Page 184 / 268
Chapter 20 Tools
NBG4604 User’s Guide
184
Click
Maintenance > Tools
. Follow the instructions in this screen to upload
firmware to your NBG4604.
Figure 112
Maintenance > Tools > Firmware
The following table describes the labels in this screen.
Note: Do not turn off the NBG4604 while firmware upload is in progress!
After you see the
Firmware Upload In Process
screen, wait two minutes before
logging into the NBG4604 again.
Figure 113
Upload Warning
Table 72
Maintenance > Tools > Firmware
LABEL
DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click
Browse...
to find it.
Browse...
Click
Browse...
to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload them.
Upload
Click
Upload
to begin the upload process. This process may take up to
two minutes.
Page 185 / 268
Chapter 20 Tools
NBG4604 User’s Guide
185
The NBG4604 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 114
Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status
screen.
If the upload was not successful, the following screen will appear. Click
Return
to
go back to the
Firmware
screen.
Figure 115
Upload Error Message
19216811.live