Chapter 18 System
NBG4604 User’s Guide
174
The following table describes the labels in this screen.
Table 68
Maintenance > System > General
LABEL
DESCRIPTION
System Setup
System Name
System Name is a unique name to identify the NBG4604 in an
Ethernet network. It is recommended you enter your computer’s
“Computer name” in this field (see
the
chapter about wizard setup for
how to find your computer’s name).
This name can be up to 30 alphanumeric characters long. Spaces are
not allowed, but dashes “-” and underscores "_" are accepted.
Domain Name
Enter the domain name (if you know it) here. If you leave this field
blank, the ISP may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP
assigned domain name.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before
the session times out. The default is 5 minutes. After it times out you
have to log in with your password again. Very long idle timeouts may
have security risks. A value of "0" means a management session never
times out, no matter how long it has been left idle (not
recommended).
Password Setup
Change your NBG4604’s password (recommended) using the fields as
shown.
Old Password
Type the default password or the existing password you use to access
the system in this field.
New Password
Type your new system password (up to 30 characters). Note that as
you type a password, the screen displays an asterisk (*) for each
character you type.
Retype to
Confirm
Type the new password again in this field.
Apply
Click
Apply
to save your changes back to the NBG4604.
Reset
Click
Reset
to begin configuring this screen afresh.
19216811.live