NBG-419N User’s Guide
191
C
HAPTER
32
Product Specifications
The following tables summarize the NBG-419N’s hardware and firmware features.
Table 79
Hardware Features
Dimensions (W x D x H)
162 mm x 115 mm x 33 mm
Weight
252 g
Power Specification
Input: 100~240 V AC, 50~60 Hz
Output: 12 V DC 1A
Ethernet ports
Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
4-5 Port Switch
You can use either straight-through or crossover Ethernet cables (MDI/
MDI-X support) to connect multiple computers or servers (for example,
game servers) in your network to the NBG-419N.
You can add up to four computers to the NBG-419N without the cost of a
hub when connecting to the Internet through the WAN port. You can add
up to five computers to the NBG-419N when you connect to the Internet in
AP mode. Add more than four computers to your LAN by using a hub.
LEDs
PWR, LAN1-4, WAN, WLAN, WPS
Reset Button
The reset button is built into the rear panel. Use this button to restore the
NBG-419N to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
WPS button
Press the WPS on two WPS enabled devices within 120 seconds for a
security-enabled wireless connection.
Wireless Switch
Turn on or turn off the wireless function of the NBG-419N using this
switch. There is no need to go into the Web Configurator.
Antenna
The NBG-419N is equipped with two 2dBi (2.4GHz) detachable antennas
to provide clear radio transmission and reception on the wireless network.
Operation Environment
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 20% ~ 90%
Storage Environment
Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 20% ~ 95%
Table 80
Firmware Features
FEATURE
DESCRIPTION
Default IP Address
192.168.1.1 (router)
192.168.1.2. (AP)
Default Subnet Mask
255.255.255.0 (24 bits)
Default Password
1234
DHCP Pool
192.168.1.33 to 192.168.1.64