1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. NBG-419N
    5. /
  5. 36
Page 176 / 292 Scroll up to view Page 171 - 175
NBG-419N User’s Guide
176
C
HAPTER
27
Firmware Upgrade
27.1
Overview
This chapter shows you how to upload a new firmware, upload or save backup configuration files
and restart the NBG-419N.
27.2
What You Can Do
Use the
Firmware
screen (
Section 27.3 on page 176
) to upload firmware to your NBG-419N.
27.3
Firmware Upload Screen
Find firmware at
www.zyxel.com
in a file that (usually) uses the system model name with a “*.bin”
extension, e.g., “NBG-419N.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
Click
Maintenance > Firmware Upgrade
. Follow the instructions in this screen to upload
firmware to your NBG-419N.
Figure 125
Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 76
Maintenance > Firmware Upgrade
LABEL
DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click
Browse...
to
find it.
Browse...
Click
Browse...
to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload
Click
Upload
to begin the upload process. This process may take up to two
minutes.
Page 177 / 292
Chapter 27 Firmware Upgrade
NBG-419N User’s Guide
177
Note: Do not turn off the NBG-419N while firmware upload is in progress!
After you see the
Firmware Upload In Process
screen, wait two minutes before logging into the
NBG-419N again.
The NBG-419N automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 126
Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status
screen.
If the upload was not successful, an error message appears. Click
Return
to go back to the
Firmware
screen.
Page 178 / 292
NBG-419N User’s Guide
178
C
HAPTER
28
Backup/Restore
28.1
Overview
This chapter shows you how to backup, restore and reset your NBG-419N.
Backup configuration allows you to back up (save) the NBG-419N’s current configuration to a file on
your computer. Once your NBG-419N is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration changes. The
backup configuration file will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your NBG-419N.
28.2
What You Can Do
Use the
Backup/Restore
screen (
Section 28.3 on page 179
) to view information related to factory
defaults, backup configuration, and restoring configuration.
Page 179 / 292
Chapter 28 Backup/Restore
NBG-419N User’s Guide
179
28.3
Configuration Screen
Click
Maintenance > Backup/Restore
. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
Figure 127
Maintenance > Backup/Restore
The following table describes the labels in this screen.
Table 77
Maintenance > Backup/Restore
LABEL
DESCRIPTION
Backup
Click
Backup
to save the NBG-419N’s current configuration to your
computer.
File Path
Type in the location of the file you want to upload in this field or click
Browse...
to
find it.
Browse...
Click
Browse...
to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Upload
Click
Upload
to begin the upload process.
Note: Do not turn off the NBG-419N while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one
minute before logging into the NBG-419N again. The NBG-419N automatically
restarts in this time causing a temporary network disconnect.
If you see an error screen, click Back to return to the Backup/Restore screen.
Reset
Pressing the
Reset
button in this section clears all user-entered
configuration information and returns the NBG-419N to its factory
defaults.
You can also press the
RESET
button on the rear panel to reset the
factory defaults of your NBG-419N. Refer to the chapter about
introducing the Web Configurator for more information on the
RESET
button.
Page 180 / 292
Chapter 28 Backup/Restore
NBG-419N User’s Guide
180
Note: If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default NBG-419N
IP address (192.168.1.1). See
Appendix C on page 217
for details on how to set up
your computer’s IP address.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top